మూస:Infobox dam
This template adds an automatically generated short description. If the automatic short description is not optimal, replace it by adding {{Short description}} at the top of the article. |
This template uses Lua: |
Usage
మార్చుUse the following infobox for all types of hydroelectric power stations involving dams, including pumped-storage. For all types of wave and tidal power stations, as well as all other types of power stations, please use {{Infobox power station}}.
{{{name}}} | |
---|---|
అధికార నామం | {{{name_official}}} |
దేశం | {{{country}}} |
ప్రదేశం | {{{location}}} |
అక్షాంశ,రేఖాంశాలు | 0°N 0°E / 0°N 0°E |
ఆవశ్యకత | {{{purpose}}} |
స్థితి | {{{status}}} |
నిర్మాణం ప్రారంభం | {{{construction_began}}} |
ప్రారంభ తేదీ | {{{opening}}} |
నిర్మూలించిన తేదీ | {{{demolished}}} |
నిర్మాణ వ్యయం | {{{cost}}} |
యజమాని | {{{builder}}} |
నిర్వాహకులు | {{{designed_by}}} |
యజమాని | {{{owner}}} |
నిర్వాహకులు | {{{operator}}} |
Upper dam and spillways | |
ఆనకట్ట రకం | {{{dam_type}}} |
నిర్మించిన జలవనరు | {{{dam_crosses}}} |
ఎత్తు (పునాది) | {{{dam_height_foundation}}} |
Height (thalweg) | {{{dam_height_thalweg}}} |
పొడవు | {{{dam_length}}} |
Elevation at crest | {{{dam_elevation_crest}}} |
Width (crest) | {{{dam_width_crest}}} |
Width (base) | {{{dam_width_base}}} |
Dam volume | {{{dam_volume}}} |
Spillways | {{{spillway_count}}} |
Spillway type | {{{spillway_type}}} |
Spillway length | {{{spillway_length}}} |
Spillway capacity | {{{spillway_capacity}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate}}} |
Spillway type | {{{spillway_type2}}} |
Spillway length | {{{spillway_length2}}} |
Spillway capacity | {{{spillway_capacity2}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate2}}} |
Spillway type | {{{spillway_type3}}} |
Spillway length | {{{spillway_length3}}} |
Spillway capacity | {{{spillway_capacity3}}} |
Spillway volumetric flow rate | {{{spillway_volumetric_flow_rate3}}} |
Upper reservoir | |
సృష్టించేది | {{{res_name}}} |
మొత్తం సామర్థ్యం | {{{res_capacity_total}}} |
క్రియాశీల సామర్థ్యం | {{{res_capacity_active}}} |
క్రియారహిత సామర్థ్యం | {{{res_capacity_inactive}}} |
పరీవాహక ప్రాంతం | {{{res_catchment}}} |
ఉపరితల వైశాల్యం | {{{res_surface}}} |
గరిష్ఠ పొడవు | {{{res_max_length}}} |
గరిష్ఠ వెడల్పు | {{{res_max_width}}} |
గరిష్ఠ నీటి లోతు | {{{res_max_depth}}} |
సాధారణ ఎత్తు | {{{res_elevation}}} |
Tidal range | {{{res_tidal_range}}} |
Lower dam and spillways | |
Type of dam | {{{lower_dam_type}}} |
Impounds | {{{lower_dam_crosses}}} |
Height (foundation) | {{{lower_dam_height_foundation}}} |
Height (thalweg) | {{{lower_dam_height_thalweg}}} |
Length | {{{lower_dam_length}}} |
Elevation at crest | {{{lower_dam_elevation_crest}}} |
Width (crest) | {{{lower_dam_width_crest}}} |
Width (base) | {{{lower_dam_width_base}}} |
Dam volume | {{{lower_dam_volume}}} |
Spillways | {{{lower_spillway_count}}} |
Spillway type | {{{lower_spillway_type}}} |
Spillway length | {{{lower_spillway_length}}} |
Spillway capacity | {{{lower_spillway_capacity}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate}}} |
Spillway type | {{{lower_spillway_type2}}} |
Spillway length | {{{lower_spillway_length2}}} |
Spillway capacity | {{{lower_spillway_capacity2}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate2}}} |
Spillway type | {{{lower_spillway_type3}}} |
Spillway length | {{{lower_spillway_length3}}} |
Spillway capacity | {{{lower_spillway_capacity3}}} |
Spillway volumetric flow rate | {{{lower_spillway_volumetric_flow_rate3}}} |
Lower reservoir | |
Creates | {{{lower_res_name}}} |
Total capacity | {{{lower_res_capacity_total}}} |
Active capacity | {{{lower_res_capacity_active}}} |
Inactive capacity | {{{lower_res_capacity_inactive}}} |
Catchment area | {{{lower_res_catchment}}} |
Surface area | {{{lower_res_surface}}} |
Maximum length | {{{lower_res_max_length}}} |
Maximum width | {{{lower_res_max_width}}} |
Maximum water depth | {{{lower_res_max_depth}}} |
Normal elevation | {{{lower_res_elevation}}} |
Tidal range | {{{lower_res_tidal_range}}} |
{{{plant_name}}} | |
Coordinates | 1°1′1″N 1°1′1″E / 1.01694°N 1.01694°E |
నిర్వాహకులు | {{{plant_operator}}} |
Commission date | {{{plant_commission}}} |
Decommission date | {{{plant_decommission}}} |
Type | {{{plant_type}}} |
హైడ్రాలిక్ హెడ్ | {{{plant_hydraulic_head}}} |
టర్బైన్లు | {{{plant_turbines}}} |
Pump-generators | {{{plant_pumpgenerators}}} |
Pumps | {{{plant_pumps}}} |
Installed capacity | {{{plant_capacity}}} |
Capacity factor | {{{plant_capacity_factor}}} |
Overall efficiency | {{{plant_efficiency}}} |
Storage capacity | {{{plant_storage_hours}}} |
వార్షిక ఉత్పత్తి | {{{plant_annual_gen}}} |
Website {{{website}}} | |
{{{extra}}} |
{{Infobox dam | name = | name_official = | image = | image_size = | image_caption = | image_alt = | location_map = | location_map_size = | location_map_caption = | location_map_alt = | coordinates = <!-- {{coord|..|..|type:landmark|display=inline,title}}--> | country = | location = | purpose = | status = | construction_began = | opening = | demolished = | cost = | builder = | designed_by = | owner = | operator = | dam_type = | dam_crosses = | dam_height_foundation = | dam_height_thalweg = | dam_length = | dam_elevation_crest = | dam_width_crest = | dam_width_base = | dam_volume = | spillway_count = | spillway_type = | spillway_length = | spillway_capacity = | spillway_volumetric_flow_rate = | spillway_type2 = | spillway_length2 = | spillway_capacity2 = | spillway_volumetric_flow_rate2 = | spillway_type3 = | spillway_length3 = | spillway_capacity3 = | spillway_volumetric_flow_rate3 = | res_name = | res_capacity_total = | res_capacity_active = | res_capacity_inactive = | res_catchment = | res_surface = | res_max_length = | res_max_width = | res_max_depth = | res_elevation = | res_tidal_range = | lower_dam_type = | lower_dam_crosses = | lower_dam_height_foundation = | lower_dam_height_thalweg = | lower_dam_length = | lower_dam_elevation_crest = | lower_dam_width_crest = | lower_dam_width_base = | lower_dam_volume = | lower_spillway_count = | lower_spillway_type = | lower_spillway_length = | lower_spillway_capacity = | lower_spillway_volumetric_flow_rate = | lower_spillway_type2 = | lower_spillway_length2 = | lower_spillway_capacity2 = | lower_spillway_volumetric_flow_rate2 = | lower_spillway_type3 = | lower_spillway_length3 = | lower_spillway_capacity3 = | lower_spillway_volumetric_flow_rate3 = | lower_res_name = | lower_res_capacity_total = | lower_res_capacity_active = | lower_res_capacity_inactive = | lower_res_catchment = | lower_res_surface = | lower_res_max_length = | lower_res_max_width = | lower_res_max_depth = | lower_res_elevation = | lower_res_tidal_range = | plant_name = | plant_coordinates = <!-- {{coord|..|..|type:landmark|display=inline}}--> | plant_operator = | plant_commission = | plant_decommission = | plant_type = | plant_hydraulic_head = | plant_turbines = | plant_pumpgenerators = | plant_pumps = | plant_capacity = | plant_capacity_factor = | plant_efficiency = | plant_storage_hours = | plant_annual_gen = | plant_annual_gen_year = | website = | extra = }}
Parameter names and descriptions
మార్చుParameter name | Description |
---|---|
name | Name of dam. |
name_official | Official name, if different from name. Preferably in native language. |
image | Image filename, without File: parameter. Animated (.gif) and media files (.ogv) are also allowed. |
image_size | Value to overrides the default 250px. |
image_caption | Caption beneath image. |
image_alt | Alternative text for image. |
location_map | Name of a location map file. The coordinates must be specified as well (see below). |
location_map_size | Value to overrides the default 250px. |
location_map_caption | Caption beneath location map. |
location_map_alt | Alternative text for location map. |
coordinates | Geographic coordinates using {{coord}}. See here for more details. Remember to avoid being overly precise. |
country | Country where the facility is located. Do not use flag icons. |
location | General area where located. Avoid being overly-detailed. |
purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose . Field codes: F =Flood control, I =Irrigation, N =Navigation, P =Power, W =Water supply.
|
status | Current status of the project. Enter any one of the following auto-expanding fields:D =Decommissioned, O =Operational, P =Proposed, UC =Under construction.
|
construction_began | Date construction began, consider using {{Start date}}. |
opening | Date, or future date, of inauguration. Consider using {{Start date}}. |
demolished | Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}. |
cost | Total cost of development. |
builder | Builder(s) of the dam. |
owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible. Example: Owner1: 60% <br/>Owner2: 40%
|
designed_by | Designers of the dam. |
operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. |
DAM AND SPILLWAYS
| |
dam_type | Type of dam. Enter any one of the following auto-expanding fields: A =Arch dam, B =Barrage, E =Embankment dam, F =Earth-fill dam, G =Gravity dam, H =Rock-fill dam,AG =Arch-gravity dam.
|
dam_crosses | Body of river or stream below dam |
dam_height | Height of dam. Deprecated parameter; use only if dam_height_foundation or dam_height_thalweg is not known.
|
dam_height_foundation | Height over foundation bed, with metric conversions. |
dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. |
dam_length | Length of dam crown, with metric conversions. |
dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. |
dam_width_crest | Width at crest of dam, with metric conversions. |
dam_width_base | Width at base of dam, with metric conversions. |
dam_volume | Volume of material in the dam structure. |
spillway_count | Number of spillways. |
spillway_type | Type of spillway. |
spillway_length | Length of spillway. |
spillway_capacity | Capacity of spillway. |
spillway_volumetric_flow_rate | Spillway volumetric flow rate. |
spillway_type2 | Type of 2nd spillway. |
spillway_length2 | Length of 2nd spillway. |
spillway_capacity2 | Capacity of 2nd spillway. |
spillway_volumetric_flow_rate2 | 2nd Spillway volumetric flow rate. |
spillway_type3 | Type of 3rd spillway. |
spillway_length3 | Length of 3rd spillway. |
spillway_capacity3 | Capacity of 3rd spillway. |
spillway_volumetric_flow_rate3 | 3rd Spillway volumetric flow rate. |
RESERVOIR
| |
res_name | Name of upstream body of water, if different than "dam_crosses". |
res_capacity_total | Capacity of reservoir, i.e. megalitres. |
res_capacity_active | The active, live or useful capacity (storage) of the reservoir. |
res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. |
res_catchment | Area of catchment for reservoir. |
res_surface | Surface area (top water level) of reservoir. |
res_max_length | Length of the reservoir at normal levels, with metric conversions. |
res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. |
res_max_depth | Maximum water depth of reservoir. |
res_elevation | The reservoir's height above sea level at normal levels, with metric conversions. |
res_tidal_range | Tidal range, if applicable. |
POWER STATION
| |
plant_name | Name of plant, if applicable. |
plant_coordinates | Geographic coordinates of the power station using {{coord}}. See here for more details. Remember to avoid being overly precise. |
plant_operator | Operator(s) of the hydroelectric power plant. |
plant_commission | Power plant commissioning date. May be different than dam opening date. |
plant_decommission | Power plant decommissioning date. May be different than dam closing date. |
plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C =Conventional, P =Pumped-storage, R =Run-of-the-river, T =Tidal barrage.
|
plant_hydraulic_head | Hydraulic head at power station. |
plant_turbines | Number of turbines, with respective rated capacity. Exclude any reversible turbine-generators (pump/generators) and pumps from this — it should only contain conventional generation-only turbines. |
plant_pumpgenerators | Number of reversible turbine-generators (pump/generators), with respective rated capacity. For pumped storage plants only. |
plant_pumps | Number of pumps, with respective rated capacity. For pumped storage plants only. |
plant_capacity | Current installed capacity in megawatts, or planned capacity for those under development. For plants which are operational, but have additional capacity under development, please use only the current installed capacity. |
plant_capacity_factor | Capacity factor of the power station, in percentage. For pumped storage, please try to rely solely on third-party sources, as manual capacity factor calculations are overly complex for PSH and their results do not align with figures in (authoritative) third-party sources. |
plant_efficiency | Overall efficiency of the power station, in percentage. Generally only applicable to pumped storage. |
plant_storage_hours | Storage capacity of the power station, in hours (if desired, you can also provide calculated or actual GWh figures in parenthesis). Generally only applicable to pumped storage. |
plant_annual_gen | Average annual power generation. To be used in combination with the following plant_annual_gen_year parameter. GW·h suffix will auto added for number without unit or any text appended.
|
plant_annual_gen_year | Given generation value exact description. If no description is given, it will default to Annual (i.e. it will expand to Annual generation). Enter following text:
|
website | Raw wikitext for entering website(s). Use [brackets] where appropriate |
extras | Free form, spans both columns. Use sparingly. |
Coordinates
మార్చుThe coordinates should be specified using coordinates – with a {{coord}} template. See Wikipedia:WikiProject Geographical coordinates#Parameters for more details about setting the coordinates_type.
Microformat
మార్చుThe HTML markup produced by this template includes an hCard microformat, which makes the place-name and location parsable by computers, either acting automatically to catalogue articles across Wikipedia, or via a browser tool operated by a person, to (for example) add the subject to an address book. Within the hCard is a Geo microformat, which additionally makes the coordinates (latitude & longitude) parsable, so that they can be, say, looked up on a map, or downloaded to a GPS unit. For more information about the use of microformats on Wikipedia, please see the microformat project.
Sub-templates
మార్చుIf the place or venue has "established", "founded", "opened" or similar dates, use {{start date}} for the earliest of those dates unless the date is before 1583 CE.
If it has a URL, use {{URL}}.
Please do not remove instances of these sub-templates.
Classes
మార్చుhCard uses HTML classes including:
- adr
- agent
- category
- county-name
- extended-address
- fn
- label
- locality
- nickname
- note
- org
- region
- street-address
- uid
- url
- vcard
Geo is produced by calling {{coord}}, and uses HTML classes:
- geo
- latitude
- longitude
Please do not rename or remove these classes nor collapse nested elements which use them.
Precision
మార్చుWhen giving coordinates, please use an appropriate level of precision. Do not use {{coord}}'s |name=
parameter.
Tracking category
మార్చుSee also
మార్చుTemplateData
మార్చుTemplateData for Infobox dam
Infobox for a dam
పరామితి | వివరణ | రకం | స్థితి | |
---|---|---|---|---|
Name | name | Name of dam | స్ట్రింగు | ఐచ్చికం |
Official name | name_official | Official name, if different from name. Preferably in native language. | స్ట్రింగు | ఐచ్చికం |
Image caption | image_caption | Caption beneath image. | స్ట్రింగు | ఐచ్చికం |
Image alternative text | image_alt | Alternative text for image. | స్ట్రింగు | ఐచ్చికం |
Location map caption | location_map_caption | Caption beneath location map. | స్ట్రింగు | ఐచ్చికం |
Location map alternative text | location_map_alt | Alternative text for location map. | స్ట్రింగు | ఐచ్చికం |
coordinates | coordinates | Geographic coordinates using the coord template | స్ట్రింగు | ఐచ్చికం |
Country | country | Country where the facility is located. Do not use flag icons. | స్ట్రింగు | ఐచ్చికం |
Location | location | General area where located. Avoid being overly-detailed. | స్ట్రింగు | ఐచ్చికం |
Purpose | purpose | Purpose of the dam(s). Common reasons are power, irrigation, flood control, navigation. If there are several purposes, consider using: Multi-purpose. Field codes: F=Flood control, I=Irrigation,, N=Navigation, P=Power. | స్ట్రింగు | ఐచ్చికం |
Status | status | Current status of the project. Enter any one of the following auto-expanding fields: D=Decommissioned, O=Operational, P=Proposed, UC=Under construction. | స్ట్రింగు | ఐచ్చికం |
Construction began | construction_began | Date construction began, consider using {{Start date}}. | స్ట్రింగు | ఐచ్చికం |
Opening date | opening | Date, or future date, of inauguration. Consider using {{Start date}}. | స్ట్రింగు | ఐచ్చికం |
Demolished date | demolished | Date of demolition (i.e. removal or destruction of dam). Consider using {{End date}}. | స్ట్రింగు | ఐచ్చికం |
Cost | cost | Total cost of development. | స్ట్రింగు | ఐచ్చికం |
Owner | owner | Owner(s) of the dam. Consider limiting to the top two, and include ownership percentage if possible.
| స్ట్రింగు | ఐచ్చికం |
Operator | operator | Operator(s) of the dam. Only use this parameter if it is different from the owner(s) of the dam. | స్ట్రింగు | ఐచ్చికం |
Dam type | dam_type | Type of dam. Enter any one of the following auto-expanding fields: A=Arch dam, B=Barrage, E=Embankment dam, F=Earth-fill dam, G=Gravity dam, AG=Arch-gravity dam. | స్ట్రింగు | ఐచ్చికం |
Dam crosses | dam_crosses | Body of river or stream below dam | స్ట్రింగు | ఐచ్చికం |
Dam height over foundation | dam_height_foundation | Height over foundation bed, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam height over thalweg | dam_height_thalweg | Height over thalweg (riverbed), with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam length | dam_length | Length of dam crown, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam elevation crest | dam_elevation_crest | Height of the dam's crest above sea level, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam width crest | dam_width_crest | Width at crest of dam, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam width at base | dam_width_base | Width at base of dam, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Dam volume | dam_volume | Volume of material in the dam structure. | స్ట్రింగు | ఐచ్చికం |
Spillway count | spillway_count | Number of spillways. | సంఖ్య | ఐచ్చికం |
Spillway type | spillway_type | Type of spillway. | స్ట్రింగు | ఐచ్చికం |
Spillway capacity | spillway_capacity | Capacity of spillway. | స్ట్రింగు | ఐచ్చికం |
Reservoir name | res_name | Name of upstream body of water, if different than "dam_crosses". | స్ట్రింగు | ఐచ్చికం |
Reservoir capacity | res_capacity_total | Capacity of reservoir, i.e. megalitres. | స్ట్రింగు | ఐచ్చికం |
Reservoir active capacity | res_capacity_active | The active, live or useful capacity (storage) of the reservoir. | స్ట్రింగు | ఐచ్చికం |
Reservoir inactive capacity | res_capacity_inactive | The inactive or dead capacity (storage) of the reservoir. | స్ట్రింగు | ఐచ్చికం |
Reservoir catchment area | res_catchment | Area of catchment for reservoir. | స్ట్రింగు | ఐచ్చికం |
Reservoir surface area | res_surface | Surface area (top water level) of reservoir. | స్ట్రింగు | ఐచ్చికం |
Reservoir maximum length | res_max_length | Length of the reservoir at normal levels, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Reservoir maximum width | res_max_width | Maximum width of the reservoir at normal levels, perpendicular to length. With metric conversions. | స్ట్రింగు | ఐచ్చికం |
Reservoir maximum depth | res_max_depth | Maximum water depth of reservoir. | స్ట్రింగు | ఐచ్చికం |
Reservoir elevation | res_elevation | The reservoir's height above sea level at normal levels, with metric conversions. | స్ట్రింగు | ఐచ్చికం |
Reservoir tidal range | res_tidal_range | Tidal range, if applicable. | స్ట్రింగు | ఐచ్చికం |
Plant name | plant_name | Name of plant, if applicable. | స్ట్రింగు | ఐచ్చికం |
Plant operator | plant_operator | Operator(s) of the hydroelectric power plant. | స్ట్రింగు | ఐచ్చికం |
Plant coordinates | plant coordinates | Geographic coordinates of the power station using the coord template | స్ట్రింగు | ఐచ్చికం |
Plant commissioning date | plant_commission | Power plant commissioning date. May be different than dam opening date. | స్ట్రింగు | ఐచ్చికం |
Plant decommissioning date | plant_decommission | Power plant decommissioning date. May be different than dam closing date. | స్ట్రింగు | ఐచ్చికం |
Plant type | plant_type | Type of hydroelectric power station. Enter any one of the following auto-expanding fields: C=Conventional, P=Pumped-storage, R=Run-of-the-river, T=Tidal barrage. | స్ట్రింగు | ఐచ్చికం |
Plant hydraulic head | plant_hydraulic_head | Hydraulic head at power station. | స్ట్రింగు | ఐచ్చికం |
Plant turbine count/capacity | plant_turbines | Number of turbines, with respective rated capacity. | స్ట్రింగు | ఐచ్చికం |
Plant generation capacity | plant_capacity | Installed generation capacity, measured in megawatts (MW). | స్ట్రింగు | ఐచ్చికం |
Plant capacity factor | plant_capacity_factor | Capacity factor of the power station, in percentage. | స్ట్రింగు | ఐచ్చికం |
Plant annual power generation | plant_annual_gen | Average annual power generation of the previous year. Measured in gigawatt-hours (GWh) | స్ట్రింగు | ఐచ్చికం |
Website | website | Raw wikitext for entering website(s). Use [brackets] where appropriate | కంటెంటు | ఐచ్చికం |
Extra data | extra | Free form, spans both columns. Use sparingly. | స్ట్రింగు | ఐచ్చికం |