మాడ్యూల్:Wd
This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
This Lua module is used on many pages and changes may be widely noticed. Test changes in the module's /sandbox or /testcases subpages, or in your own module sandbox. Consider discussing changes on the talk page before implementing them. |
You might want to use one of the user-friendly wrapper templates {{Wikidata}} and {{WikidataOI}} instead of invoking this module directly. |
This మాడ్యూల్ is intended to fetch data from Wikidata with or without a link to the connected Wikipedia article and with many other features.
Usage
మార్చుThe general structure of a call to this మాడ్యూల్ is as follows. Note that the basic structure consists of positional commands, flags and arguments, which all have a fixed position.
{{#invoke:wd|command1|flag1a|flag1b|flag1c|command2|flag2a|flag2b|flag2c|flag0a|flag0b|flag0c|arg1|arg2|arg3}}
Use different commands to get different kinds of values from Wikidata. At least one command must be given and multiple commands can be combined into one call as shown above (in any order, more than two is also possible), but this only applies to commands from the claim class; calls containing a command from the general class cannot contain any other command. Each command can be followed by any number of command flags, which are optional and can be used to tweak the output generated by that command.
The commands and their flags may be followed by any number of configuration flags, which are also optional and affect the selection of data and the మాడ్యూల్'s behaviour in general. The call is closed with the positional arguments, which may be required depending on the given command(s). Some named arguments (i.e. name-value pairs) also exist, as well as a set of named flags for advanced usage that can be used to change the way the fetched values are merged together into the output.
This మాడ్యూల్ was designed to provide the basic needs for fetching data from Wikidata, but a lot can be achieved through different combinations of calls. For convenience, such combinations could be wrapped into new templates that serve a specific need. See also the section on common use cases below for some examples of useful "building blocks". Likewise, the functionality of this మాడ్యూల్ can be extended by creating wrapper templates that use the main
command provided by this module (just like {{WikidataOI}} does).
Common use cases
మార్చుBelow follows a list of common use cases. In the future, shortcut commands may be implemented that are equivalent to these calls for convenience.
Call | Use case |
---|---|
{{#invoke:wd|label|raw}}
|
Returns the Q-identifier of the Wikidata item connected to the current page (e.g. "Q55"). |
{{#if:
|
Performs a check to determine if the current page has a Wikidata item.
Note that this statement relies on a returned value that is either empty or non-empty and that the |
Commands
మార్చుThe commands (command1
, command2
, ...) determine what kind of values are returned. One call can only contain commands from a single class.
Claim class
మార్చుThe claim class commands can be combined, meaning that multiple commands of different types from this class can be given at one time (see above for usage).
Combine multiple commands into one call to this మాడ్యూల్, instead of making multiple calls to this మాడ్యూల్ with one command each, to be sure that all the returned pieces of information belong to each other (see also the examples below).
Type | Command | Returns | Basic usage | Description |
---|---|---|---|---|
I | property
|
first match[a] | {{#invoke:wd|property|P1}}
|
Returns the requested property – or list of properties – from the current item-entity or from a given entity.
This command can be given only once in one call. |
properties
|
all matches | {{#invoke:wd|properties|P1}}
| ||
II | qualifier
|
first match[b] | {{#invoke:wd|qualifier|P1|P2}}
|
Returns the requested qualifier – or list of qualifiers – from the given property of the current item-entity or of a given entity.
Unlike the other claim class commands, this command can be given multiple times to retrieve different qualifiers in one call. |
qualifiers
|
all matches | {{#invoke:wd|qualifiers|P1|P2}}
| ||
III | reference
|
first match[b] | {{#invoke:wd|reference|P1}}
|
Returns a reference – or list of references – from the given property of the current item-entity or of a given entity.[c]
This command can be given only once in one call. |
references
|
all matches | {{#invoke:wd|references|P1}}
| ||
|
General class
మార్చుThe general class commands cannot be combined.
Type | Command | Returns | Basic usage | Description |
---|---|---|---|---|
I | label
|
{{#invoke:wd|label}}
|
Returns the label of the current item-entity or of a given entity if present. | |
II | title
|
{{#invoke:wd|title}}
|
Returns the title of the page connected to the current item-entity or to a given item-entity if such page exists. | |
III | description
|
{{#invoke:wd|description}}
|
Returns the description of the current item-entity or of a given entity if present. | |
IV | alias
|
first match[a] | {{#invoke:wd|alias}}
|
Returns an alias – or list of aliases – of the current item-entity or of a given entity if present. |
aliases
|
all matches | {{#invoke:wd|aliases}}
| ||
V | badge
|
first match[a] | {{#invoke:wd|badge}}
|
Returns a badge – or list of badges – for the page connected to the current item-entity or to a given item-entity if such page exists. |
badges
|
all matches | {{#invoke:wd|badges}}
| ||
Flags
మార్చుThe following (optional) flags are available which can be used to alter this మాడ్యూల్'s behaviour. They must be given after the (first) command and before the positional arguments. For convenience, empty flags (i.e. ||
) are allowed and will simply be ignored.
Command flags
మార్చుThese flags (flag1*
, flag2*
, ...) apply to the command that precedes them directly.
Flag | Description |
---|---|
raw
|
Returns the raw value if applicable.
If this flag is used with item or property datatypes, then this will return the Q-identifier or P-identifier instead of the regular label. For quantity datatypes, this flag will strip off any units of measurement, unless the If this flag is used with time datatypes, then the returned date will be in the format of If it is used with globe coordinate datatypes, then it replaces the various symbols with forward slashes in the returned value (e.g. |
linked
|
Creates a link to the Wikipedia article that is connected to the property or qualifier if it exists. Also links units of measurement that may be appended to values.
If this parameter is omitted, then the plain property or qualifier value will be returned. |
short
|
[EXPENSIVE] Returns the పొట్టి పేరు (P1813) of any entity returned if they have one attached. If that is not the case, then the default behaviour of returning the entity's label will occur.
|
multilanguage
|
Returns monolingual text values in any available language, not just the current wiki's language. |
unit
|
Returns only the unit of measurement for quantity datatypes. |
Configuration flags
మార్చుThese flags (flag0*
) are general configuration flags and can be given anywhere after the first command (but before the positional arguments).
Flag | Description | Command class | |
---|---|---|---|
Combination of: | preferred
|
Sets a rank constraint for the selected claim(s).
The first three set the ranks for which claim(s) will be selected. They can optionally be followed by a If the The default is Output is always sorted from highest rank to lowest (regardless of any of these flags being set). |
claim |
normal
| |||
deprecated
| |||
best
| |||
Combination of: | future
|
Sets a time constraint for the selected claim(s). Uses the claims' qualifiers of ప్రారంభ సమయం (P580) and ముగింపు తేదీ (P582) to determine if the claim is valid for the selected time period(s).
The default is |
claim |
current
| |||
former
| |||
mdy
|
Returns date values in month-day-year order instead of day-month-year order. | claim | |
single
|
Returns only a single claim instead of multiple (if multiple claims match). Has no effect if the property /properties command is given, in which case this flag would be redundant.
|
claim | |
sourced
|
Only returns claims that have at least one non-empty reference. (References having only ignored parameters are considered empty.) | claim | |
One of: | edit
|
Adds a clickable icon after the output that may be used by readers to edit the returned claim on Wikidata.
If |
claim, general |
edit@end
|
Arguments
మార్చుThe arguments determine the sources from which all the returned values are fetched.
Positional arguments
మార్చుThe following table shows the available positional arguments (arg*
) in their fixed order. For each command, the applicable set of arguments is marked. If multiple commands are given, then the applicable set is the union of the individual sets. For instance, if the commands properties
and qualifiers
have been given, then at least both the arguments property_id
and qualifier_id
should be given as well.
More than one qualifier
/qualifiers
command can be given. The order in which these commands with their flags are given matches the order in which the respective qualifier_id
arguments are given.
(required) | (optional) | (optional) | (required) | (optional) | (required) | (required) | |||
{{#invoke:wd
|
commands
|
flags
|
entity_id
|
property_id
|
raw_value
|
qualifier_id
|
qualifier_id
|
}}
| |
---|---|---|---|---|---|---|---|---|---|
label , title ,description ,alias /aliases ,badge /badges
|
|||||||||
property /properties
|
|||||||||
reference /references
|
|||||||||
qualifier /qualifiers
|
|||||||||
qualifier /qualifiers (optional 2nd, 3rd, etc.)
| |||||||||
Below follows a description of all positional arguments.
Argument | Description |
---|---|
entity_id
(optional) |
[EXPENSIVE] Q-identifier of the item-entity to be accessed (e.g. Q55 ), P-identifier (or an available alias) of the property-entity to be accessed preceded by the Property: prefix (e.g. Property:P38 ), or page title of the Wikipedia article whose connected item-entity is to be accessed preceded by : , a prefixed colon (e.g. :Netherlands ).
In case of the general class commands, the If this parameter is omitted, then the item-entity connected to the current page will be used (except when |
property_id
|
P-identifier (or an available alias) of the property within the entity to be accessed, without the Property: prefix (e.g. P35 ).
|
raw_value
(optional) |
Either the Q-identifier equal to the property value (e.g. Q29574 ) or a literal value (i.e. string or quantity etc., no entity label) equal to the raw property value of the particular claim to be accessed.
Dates as literal values must be formatted Globe coordinates as literal values must be formatted with forward slashes (i.e. The special type 'no value' can be given by entering the empty string (i.e. To get a literal vertical bar If this parameter is omitted, then all claims (matching any other constraints) within the property will be accessed. |
qualifier_id
|
P-identifier (or an available alias) of the qualifier within the entity to be accessed, without the Property: prefix (e.g. P580 ).
|
Named arguments
మార్చుBelow follows a description of all named arguments, which are name-value pairs (i.e. |name=value
). These are all optional and can be given anywhere after the first command.
Argument | Description | Command class |
---|---|---|
eid=
|
[EXPENSIVE] This argument can be used to give the Q-identifier (e.g. |eid=Q55 ) or P-identifier (or an available alias) of the entity to be accessed. It offers the same functionality as the positional argument entity_id , with one difference: if the argument is given but its value is left empty (i.e. |eid= ), then no entity is accessed at all instead of the item-entity connected to the current page. This is useful in some cases where a variable entity-ID is expected, but where the item-entity connected to the current page should not be accessed as the default.
Also, the This argument only has effect if the positional argument |
claim, general |
page=
|
[EXPENSIVE] This argument can be used to give the page title (e.g. |page=Netherlands ) of the Wikipedia article whose connected item-entity is to be accessed. It behaves similar to the named argument eid= and can be used instead of the positional argument entity_id (note that no prefixed colon, : , is required). If the argument is given but its value is left empty (i.e. |page= ), then no entity is accessed at all instead of the item-entity connected to the current page.
This argument only has effect if the positional argument |
claim, general |
date=
|
This argument can be used to set a particular date (e.g. |date=1731-02-11 ) relative to which claim matching using the future , current and former flags is done, instead of relative to today. It overrides the default of these flags to current so that by default only claims that were valid at the given date are returned (based on the claims' qualifiers of ప్రారంభ సమయం (P580) and ముగింపు తేదీ (P582)).
The date value must be formatted |
claim |
<qualifier>=
|
The <qualifier> is a placeholder for a set of arguments that determine which claims should be accessed based on qualifier value, analogous to the pair of positional arguments property_id and raw_value (that determine access based on property value).
As such, Example: Multiple arguments of this type can be given to match multiple qualifier values simultaneously for each claim. |
claim |
Property aliases
మార్చుProperty aliases are other names for P-identifiers that can be used instead. The following property aliases (which are case-sensitive) are currently available:
Alias | translates to |
P-identifier |
---|---|---|
coord | → | P625 |
image | → | P18 |
author | → | P50 |
authorNameString | → | P2093 |
publisher | → | P123 |
importedFrom | → | P143 |
wikimediaImportURL | → | P4656 |
statedIn | → | P248 |
pages | → | P304 |
language | → | P407 |
hasPart | → | P527 |
publicationDate | → | P577 |
startTime | → | P580 |
endTime | → | P582 |
chapter | → | P792 |
retrieved | → | P813 |
referenceURL | → | P854 |
sectionVerseOrParagraph | → | P958 |
archiveURL | → | P1065 |
title | → | P1476 |
formatterURL | → | P1630 |
quote | → | P1683 |
shortName | → | P1813 |
definingFormula | → | P2534 |
archiveDate | → | P2960 |
inferredFrom | → | P3452 |
typeOfReference | → | P3865 |
column | → | P3903 |
subjectNamedAs | → | P1810 |
wikidataProperty | → | P1687 |
References
మార్చుWhen either the reference
or the references
command is used and a reference is encountered (in Wikidata), the module attempts to display it using the {{Cite web}} template. The reference to be displayed has to have at least శీర్షిక (P1476) and మూలం URL (P854) properties. The below table shows the mapping of Wikidata properties to parameters of Cite web.
Wikidata property | Parameter of Cite web | Notes |
---|---|---|
archive date (P2960) | archive-date | |
ఆర్కైవ్ యుఅర్ఎల్ (P1065) | archive-url | |
రచయిత (P50) | authorN | N can be 1, 2, 3... |
కర్త పేరు పదబంధం (P2093) | ||
భాష (P407) | language | Ignored when the same as the local language. |
పుట (P304) | pages | |
ప్రచురణ తేదీ (P577) | date | |
ప్రచురణకర్త (P123) | publisher | |
quotation (P1683) | quote | |
మూలం URL (P854) | url | |
సేకరించబడిన సమయం (P813) | access-date | Ignored when Wikimedia import URL (P4656) is present but మూలం URL (P854) is not. |
section, verse, paragraph, or clause (P958) | at | |
ప్రస్తావింపు (P248) | website | |
subject named as (P1810) | title | Used only when శీర్షిక (P1476) is not present, but a URL (either from మూలం URL (P854) or from an external identifier, as described below) is, otherwise ignored. |
శీర్షిక (P1476) | title |
The following properties are ignored: బొమ్మ (P18), దిగుమతి మూలం (P143), inferred from (P3452), type of reference (P3865), Wikimedia import URL (P4656).
If there is no మూలం URL (P854) property present in the reference, but a property of the "External identifier" data type is present both in the reference and in the Wikidata property (P1687) of the item in ప్రస్తావింపు (P248), a URL is generated from its content and is used in the same manner as a URL given in మూలం URL (P854).
If a శీర్షిక (P1476) or a మూలం URL (P854) property is missing or the reference has unknown properties, the module attempts to display it using the {{Cite Q}} template. The ప్రస్తావింపు (P248) property is needed. It's used for the first (unnamed) parameter of Cite Q. The below table shows the mapping of other properties to Cite Q parameters.
Wikidata property | Parameter of Cite Q | Notes |
---|---|---|
అధ్యాయం (P792) | chapter | |
column (P3903) | at | |
పుట (P304) | pages | |
ప్రచురణ తేదీ (P577) | date | |
సేకరించబడిన సమయం (P813) | access-date | |
section, verse, paragraph, or clause (P958) | section | |
శీర్షిక (P1476) | title | |
any property of the "External identifier" data type | id | The label of the property is prepended before its content. |
The properties listed under the first table (in this section) are also ignored when using Cite Q.
A reference could be displayed using Cite Q only if the reference has a ప్రస్తావింపు (P248) property and has only properties listed in the table above. If neither Cite web nor Cite Q could be used to display a reference, the following error is returned:
Error: Unable to display the reference properly. See the documentation for details.
To fix this error, check if the reference has the required properties and doesn't have any unknown properties, as described above. The Wikidata help page on references can also be helpful when sourcing statements.
Note: Users copying this template/module to another wiki: The local names of the Cite web and Cite Q templates are fetched from the sitelinks of the Q5637226 or the Q22321052 item, respectively. If the local citation template isn't linked from its Wikidata item or it doesn't exist at all, this module skips attempting to display citations using it.
Advanced usage
మార్చుThe layout of the output from (a combination of) commands that have both a singular and a plural form (e.g. property
/properties
) can be customized by using a number of named flags, which are name-value pairs (i.e. |flag=value
), that can be given anywhere after the first command. The table below shows the available named flags.
To insert a space at the beginning or end of a value
, use an underscore _
. To get a literal underscore, escape it by placing a backslash \
directly in front of it (i.e. \_
); the same holds for a literal backslash (i.e. \\
). To get a literal vertical bar |
, use {{!}}
or |
.
Named flag | Default value | Default condition | Description | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
format=
|
%p[%s][%r]
|
if the property /properties command was given and the qualifier /qualifiers command was not given
|
The format of a single claim. The available parameters are as follows.
Optional parameters can be given by encapsulating them between square brackets: To use two opening square brackets that directly follow each other (i.e. At least one parameter must be given that is not optional, while the To get a literal | ||||||||||||||||
%q[%s][%r]
|
if the property /properties command was not given and the qualifier /qualifiers command was given
| ||||||||||||||||||
%r
|
if only the reference /references command was given
| ||||||||||||||||||
%p[ <span style="font-size:85\%">(%q)</span>][%s][%r]
|
if the property /properties command was given and the qualifier /qualifiers command was given
| ||||||||||||||||||
%a[%s]
|
if the alias /aliases command was given
| ||||||||||||||||||
%b[%s]
|
if the badge /badges command was given
| ||||||||||||||||||
sep=
|
_
|
default | The fixed separator between each pair of claims, aliases or badges. | ||||||||||||||||
|
if only the reference /references command was given without the raw flag
| ||||||||||||||||||
sep%s=
|
,
|
default | The movable separator between each pair of claims, aliases or badges. This will be the value of the %s parameter applied to all claims, aliases or badges, except for the last in the list (which can be set with the punc flag).
| ||||||||||||||||
;
|
if the property /properties command was not given and the qualifier /qualifiers command was given
| ||||||||||||||||||
sep%q1= , sep%q2= , sep%q3= , ...
|
,_
|
default | The separator between each pair of qualifiers of a single claim. These are the value separators for the %q1 , %q2 , %q3 , ... parameters.
If only one | ||||||||||||||||
sep%q=
|
,_
|
if exactly one qualifier /qualifiers command was given
|
The separator between each set of qualifiers of a single claim. This is the value separator for the %q parameter.
If only one | ||||||||||||||||
;_
|
if more than one qualifier /qualifiers command was given
| ||||||||||||||||||
sep%r=
|
|
default | The separator between each pair of references of a single claim. This is the value separator for the %r parameter.
| ||||||||||||||||
_
|
if the raw flag was given for the reference /references command
| ||||||||||||||||||
punc=
|
|
default | A punctuation mark placed at the end of the output. This will be placed on the %s parameter applied to the last claim (or alias or badge) in the list.
This allows the last claim's references to be placed after the punctuation mark when the output is used as part of a sentence. |
Examples
మార్చుParameters and output types | Example | Description |
---|---|---|
Q55 = "Netherlands", P395 = "licence plate code"
[string] |
{{#invoke:wd|property|Q55|P395}}
|
Gets a literal string value. |
P395 = "licence plate code"
[string] |
{{#invoke:wd|property|P395}}
|
If the మాడ్యూల్ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
|
Q55 = "Netherlands", P395 = "NL"
[string] |
{{#invoke:wd|property|eid=Q55|P395}}
|
An entity-ID can also be given using the eid= argument.
|
P395 = "NL"
[string] |
{{#invoke:wd|property|page=Netherlands|P395}}
|
A page title can be given instead of an entity-ID using the page= argument.
|
Q55 = "Netherlands", P395 = "licence plate code"
[string] |
{{#invoke:wd|property|edit|Q55|P395}} |
Adds a clickable icon that may be used to edit the returned value on Wikidata. |
Q55 = "Netherlands", P395 = "licence plate code"
[string] |
{{#invoke:wd|property|edit@end|Q55|P395}} |
Places the edit icon at the end of the line. |
Q55 = "Netherlands", P1082 = "population"
[quantity] |
{{#invoke:wd|property|normal+|Q55|P1082}}
|
Gets a single property value from claims with a 'normal' rank or higher. |
Q55 = "Netherlands", P1082 = "population"
[quantity] |
{{#invoke:wd|properties|normal+|Q55|P1082}}
|
Gets multiple property values from claims with a 'normal' rank or higher. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[quantity], [time] |
{{#invoke:wd|properties|qualifier|normal+|Q55|P1082|P585}}
|
Gets a single qualifier value for each claim, additional to the property value. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[quantity], [time], [reference] |
{{#invoke:wd|properties|qualifier|references|normal+|Q55|P1082|P585}} |
Gets references for each claim. |
Q55 = "Netherlands", P1082 = "population"
[quantity], [reference] |
A total of
|
Gets a property with its references. |
Q55 = "Netherlands", P1082 = "population"
[quantity], [reference] |
The Netherlands has a population of
|
Adds a punctuation mark at the end of the output, in front of the references. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[quantity], [time], [reference] |
<ul>
|
Returns the output in a custom format. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[time] |
{{#invoke:wd|qualifier|normal+|Q55|P1082|P585}}
|
Gets a single qualifier per claim, by default for multiple matching claims. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[time] |
{{#invoke:wd|qualifier|normal+|single|Q55|P1082|P585}}
|
To get a single qualifier for only a single claim, give the single flag too so that only a single claim will be accessed.
|
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[time] |
{{#invoke:wd|qualifier|Q55|P1082|10026773|P585}}
|
Gets a qualifier from claims for which the (raw) property value matches a given literal value. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[time] |
{{#invoke:wd|qualifier|mdy|Q55|P1082|10026773|P585}}
|
Gets dates in month-day-year order. |
Q55 = "Netherlands", P1082 = "population", P585 = "point in time"
[time] |
{{#invoke:wd|qualifier|raw|Q55|P1082|10026773|P585}}
|
Gets a raw date value. |
Q55 = "Netherlands", P1082 = "population"
[reference] |
{{#invoke:wd|references|Q55|P1082|10026773}}
|
Gets the references from a particular claim. |
Q55 = "Netherlands", P1082 = "population"
[reference] |
{{#invoke:wd|references|raw|Q55|P1082|10026773}}
|
Gets references from a particular claim in their raw form. |
Q55 = "Netherlands", P1081 = "Human Development Index"
[quantity], [reference] |
{{#invoke:wd|properties|references|normal+|Q55|P1081}}
|
Gets properties from each claim with any references they have. |
Q55 = "Netherlands", P1081 = "Human Development Index"
[quantity], [reference] |
{{#invoke:wd|properties|references|normal+|sourced|Q55|P1081}}
|
Only gets properties from claims that have at least one reference. |
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part"
[entity label] |
{{#invoke:wd|qualifier|Q55|P2855|P518}}
|
Gets a single qualifier value (for each matching claim). |
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part"
[entity label] |
{{#invoke:wd|qualifiers|Q55|P2855|P518}}
|
Gets multiple qualifier values (for each matching claim). |
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part"
[quantity], [entity label] |
{{#invoke:wd|properties|qualifiers|Q55|P2855|P518}}
|
Gets multiple property values along with multiple qualifier values. |
Q55 = "Netherlands", P2855 = "VAT rate", P518 = "applies to part"
[quantity], [entity label] |
{{#invoke:wd|properties|qualifiers|Q55|P2855|P518|sep=_+_|sep%s=|sep%q=_/_}}
|
Returns the output with custom separators. |
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time"
[entity label], [time] |
{{#invoke:wd|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582}}
|
Gets two different qualifier values for each claim. |
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time"
[entity label], [time] |
{{#invoke:wd|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|sep%q=_–_}}
|
Returns the output with a custom separator. |
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time"
[entity label], [time] |
{{#invoke:wd|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|format=%p[ <span style="font-size:85\%">(%q1[ – %q2])</span>][%s][%r]}}
|
Returns the output in a custom format instead of with a custom separator. |
Q55 = "Netherlands", P35 = "head of state", P580 = "start time", P582 = "end time"
[entity label], [time] |
{{#invoke:wd|properties|qualifier|qualifier|normal+|Q55|P35|P580|P582|format=%p[ <span style="font-size:85\%">([<![]--%q2]since [%q2--[]>]%q1[ – %q2])</span>][%s][%r]}}
|
To add text only when a certain value is not present, like adding the word since if there is no end time, wrap it in between two optional blocks containing HTML comment tags and the relevant parameter (this also prevents the text from being added to the page source). |
Q55 = "Netherlands", P35 = "head of state", Q29574 = "Beatrix of the Netherlands", P580 = "start time", P582 = "end time"
[entity label], [time] |
{{#invoke:wd|properties|qualifier|raw|qualifier|normal+|Q55|P35|Q29574|P580|P582}}
|
Gets a property with qualifiers from claims for which the property matches a given Q-identifier, with one of the qualifier values in its raw form. |
Q55 = "Netherlands", P38 = "currency", P518 = "applies to part"
[entity label] |
{{#invoke:wd|properties|qualifiers|normal+|current|Q55|P38|P518}}
|
Gets claims that are currently valid. |
Q55 = "Netherlands", P38 = currency", P518 = "applies to part"
[entity label] |
{{#invoke:wd|properties|linked|qualifiers|normal+|current|Q55|P38|P518}}
|
Gets claims with linked property values. |
Q55 = "Netherlands", P38 = currency", P518 = "applies to part"
[entity label] |
{{#invoke:wd|properties|qualifiers|linked|normal+|current|Q55|P38|P518}}
|
Gets claims with linked qualifier values. |
Q55 = "Netherlands", P38 = currency", P518 = "applies to part"
[entity label] |
{{#invoke:wd|properties|linked|short|qualifiers|linked|normal+|current|Q55|P38|P518}}
|
Gets claims with linked property and qualifier values, with short property values wherever available. |
Q55 = "Netherlands", P38 = currency", Q4917 = "United States dollar", P518 = "applies to part"
[entity label] |
{{#invoke:wd|qualifiers|normal+|current|Q55|P38|Q4917|P518}}
|
Gets qualifiers from claims for which the (raw) property value matches a given Q-identifier. |
Q55 = "Netherlands", P38 = currency", P518 = "applies to part", Q27561 = "Caribbean Netherlands"
[entity label] |
{{#invoke:wd|properties|normal+|current|Q55|P38|P518=Q27561}}
|
Gets properties from claims for which a (raw) qualifier value matches a given Q-identifier. |
Q55 = "Netherlands", P38 = currency"
[entity label] |
{{#invoke:wd|properties|normal+|former|Q55|P38}}
|
Gets claims that were valid in the past. |
Q55 = "Netherlands", P38 = currency"
[entity label] |
{{#invoke:wd|properties|raw|normal+|former|Q55|P38}}
|
Gets raw property values. |
Q55 = "Netherlands", P38 = currency"
[entity label] |
{{#invoke:wd|properties|raw|linked|normal+|former|Q55|P38}}
|
Gets raw property values that are linked to Wikidata. |
Q55 = "Netherlands", P1549 = "demonym"
[monolingual text] |
{{#invoke:wd|property|Q55|P1549}}
|
Gets a monolingual text value in the current wiki's language. |
Q55 = "Netherlands", P1549 = "demonym", P407 = "language of work or name", Q36846 = "Toki Pona"
[monolingual text] |
{{#invoke:wd|property|multilanguage|Q55|P1549|P407=Q36846}}
|
Gets a monolingual text value in any available language. |
Q55 = "Netherlands", P2884 = "mains voltage"
[quantity] |
{{#invoke:wd|property|Q55|P2884}}
|
Gets a quantity value with its associated unit of measurement. |
Q55 = "Netherlands", P2884 = "mains voltage"
[quantity] |
{{#invoke:wd|property|linked|Q55|P2884}}
|
Gets a quantity value with a linked unit of measurement. |
Q55 = "Netherlands", P2884 = "mains voltage"
[quantity] |
{{#invoke:wd|property|raw|Q55|P2884}}
|
Gets a raw quantity value. |
Q55 = "Netherlands", P2884 = "mains voltage"
[quantity] |
{{#invoke:wd|property|unit|Q55|P2884}}
|
Gets only the unit of measurement. |
Q55 = "Netherlands", P2884 = "mains voltage"
[quantity] |
{{#invoke:wd|property|unit|raw|Q55|P2884}}
|
Gets the raw unit of measurement. |
Q55 = "Netherlands", P625 = "coordinate location"
[globe coordinate] |
{{#invoke:wd|property|Q55|P625}}
|
Gets a globe coordinate value. |
Q55 = "Netherlands", P625 = "coordinate location"
[globe coordinate] |
{{#invoke:wd|property|linked|Q55|P625}} |
Gets a linked globe coordinate value. |
Q55 = "Netherlands", P625 = "coordinate location"
[globe coordinate] |
{{#invoke:wd|property|raw|Q55|P625}}
|
Gets a raw globe coordinate value. |
Q55 = "Netherlands", P625 = "coordinate location"
[globe coordinate] |
{{#invoke:wd|property|Q55|coord}}
|
A property alias can be used instead of the P-identifier. |
Q55 = "Netherlands", P41 = "flag image"
[commons media] |
{{#invoke:wd|property|linked|Q55|P41}} |
Gets a media file name and links to it on Commons. |
Q55 = "Netherlands", P41 = "flag image"
[commons media] |
{{#invoke:wd|property|raw|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}}
|
A Commons media file can be included on the page as-is by omitting the linked and raw flags, but by using the raw flag it can be freely formatted.
|
Q55 = "Netherlands", P41 = "flag image"
[commons media] |
{{#invoke:wd|property|raw|date=1700-05-06|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}}
|
To get the value of a property that was valid at a given time, the date= argument can be used.
|
Q55 = "Netherlands", P41 = "flag image"
[commons media] |
{{#invoke:wd|property|raw|date=1700-05-06|former|Q55|P41|format=\[\[File:%p {{!}} thumb {{!}} left\]\]}}
|
The time constraint flags work relatively to the date value given for the date= argument.
|
Q915684 = "Lorentz–Lorenz equation", P2534 = "defining formula"
[math] |
{{#invoke:wd|property|Q915684|P2534}} |
Gets a mathematical expression. |
Q915684 = "Lorentz–Lorenz equation", P7235 = "in defining formula", P9758 = "symbol represents"
[entity label], [math] |
<ul>
|
Mathematical expressions can be combined with regular text as usual. |
Q6256 = "country", P3896 = "geoshape"
[geographic shape] |
{{#invoke:wd|property|linked|Q6256|P3896}} |
Gets a geographic shape data file name and links to it on Commons. |
Q4917 = "United States dollar"
[entity label] |
{{#invoke:wd|label|Q4917}}
|
Gets an item's label. |
Q4917 = "United States dollar"
[entity label] |
{{#invoke:wd|label|short|linked|Q4917}} |
Gets an item's short and linked label. |
P38 = currency"
[entity label] |
{{#invoke:wd|label|P38}}
|
Gets a property's label. |
P38 = currency"
[entity label] |
{{#invoke:wd|label|linked|P38}}
|
Gets a property's label that is linked to Wikidata. |
Q776 = "Utrecht"
[entity label] |
{{#invoke:wd|label|Q776}}
|
Gets an item's label. |
Q776 = "Utrecht"
[entity label] |
{{#invoke:wd|label|linked|Q776}}
|
Gets an item's linked label. |
[entity label] |
{{#invoke:wd|label}}
|
If the మాడ్యూల్ is transcluded on the Utrecht (province) page (which is linked to Q776), then the Q776 can be omitted.
|
[entity label] |
{{#invoke:wd|label|raw}}
|
If just the label command with the raw flag is given, then the Q-identifier of the item connected to the current page is returned.
|
[entity label] |
{{#invoke:wd|label|raw|linked}}
|
If additionally the linked flag is given, then the Q-identifier of the item connected to the current page is linked to Wikidata.
|
Q776 = "Utrecht"
[page title] |
{{#invoke:wd|title|Q776}}
|
Gets the title of the page on the current wiki that is linked to the given item. |
Q776 = "Utrecht"
[page title] |
{{#invoke:wd|title|linked|Q776}} |
Gets the linked title of the page on the current wiki that is linked to the given item. |
[page title] |
{{#invoke:wd|title}}
|
If the మాడ్యూల్ is transcluded on the Utrecht (province) page (which is linked to Q776), then the Q776 can be omitted.
|
Q55 = "Netherlands"
[entity description] |
{{#invoke:wd|description|Q55}}
|
Gets an item's description. |
[entity description] |
{{#invoke:wd|description}}
|
If the మాడ్యూల్ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
|
Q55 = "Netherlands"
[entity alias] |
{{#invoke:wd|alias|Q55}}
|
Gets one of an item's aliases. |
Q55 = "Netherlands"
[entity alias] |
{{#invoke:wd|aliases|Q55}}
|
Gets all of an item's aliases. |
Q55 = "Netherlands"
[entity alias] |
{{#invoke:wd|alias|linked|Q55}}
|
Gets a linked alias from an item. |
[entity alias] |
{{#invoke:wd|alias}}
|
If the మాడ్యూల్ is transcluded on the Netherlands page (which is linked to Q55), then the Q55 can be omitted.
|
Q2 = "Earth"
[page badge] |
{{#invoke:wd|badges|Q2}}
|
Gets the badges for the page on the current wiki that is linked to the given item. |
Q2 = "Earth"
[page badge] |
{{#invoke:wd|badges|raw|Q2}}
|
Gets the raw badges for the page on the current wiki that is linked to the given item. |
[page badge] |
{{#invoke:wd|badges}}
|
If the మాడ్యూల్ is transcluded on the Earth page (which is linked to Q2), then the Q2 can be omitted.
|
Q28865 = "Python", P548 = "version type", P348 = "software version identifier",
[version], [reference] |
{{#invoke:wd|property|reference|edit|Q28865|P548=Q2804309|P348}}
|
Get Python's latest stable release version with its references. You may want to use P548=Q2122918 to get the latest preview release version. |
Example references
మార్చు- ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 "Bevolking; kerncijfers, 1950-2022".
- ↑ 2.0 2.1 2.2 2.3 2.4 "CBS StatLine - Bevolking; kerncijfers". Statistics Netherlands. Archived from the original on 27 August 2015. Retrieved 22 August 2015.
- ↑ 3.0 3.1 "CBS StatLine - Bevolking; kerncijfers". Archived from the original on 3 September 2014. Retrieved 26 August 2014.
- ↑ 4.0 4.1 "Nederland telt 17 miljoen inwoners". 21 March 2016.
- ↑ 5.0 5.1 "Bevolking; kerncijfers, 1950-2022". Retrieved 18 March 2023.
- ↑ 6.00 6.01 6.02 6.03 6.04 6.05 6.06 6.07 6.08 6.09 6.10 6.11 6.12 6.13 6.14 6.15 6.16 6.17 6.18 6.19 6.20 6.21 6.22 6.23 6.24 6.25 6.26 6.27 6.28 6.29 6.30 6.31 6.32 6.33 6.34 6.35 6.36 6.37 6.38 6.39 6.40 6.41 6.42 6.43 6.44 6.45 6.46 6.47 6.48 6.49 6.50 6.51 6.52 6.53 6.54 6.55 "Human Development Data (1990-2017)". Human Development Report. Archived from the original on 30 December 2018.
- ↑ 7.00 7.01 7.02 7.03 7.04 7.05 7.06 7.07 7.08 7.09 7.10 7.11 7.12 7.13 "Netherlands". Archived from the original on 2 February 2017.
- ↑ "It's time for another set of Python releases! Python 3.11.3, 3.10.11 and 3.12 alpha 7 are now available". 5 April 2023. Retrieved 6 April 2023.
TemplateData
మార్చుThis template fetches data from the centralized knowledge base Wikidata. To edit the data, click on "Wikidata item" in the left sidebar.
పరామితి | వివరణ | రకం | స్థితి | |||
---|---|---|---|---|---|---|
పరామితులు ఇవ్వలేదు |
See also
మార్చు- {{Wikidata}}, a user-friendly wrapper template for this module.
- {{WikidataOI}}, a wrapper template for this module that adds an opt-in toggle.
- {{Pageid to title}}, to get a page title using its local page id, rather than Wikidata
-- Original module located at [[:en:Module:Wd]] and [[:en:Module:Wd/i18n]].
require("strict")
local p = {}
local module_arg = ...
local i18n
local i18nPath
local function loadI18n(aliasesP, frame)
local title
if frame then
-- current module invoked by page/template, get its title from frame
title = frame:getTitle()
else
-- current module included by other module, get its title from ...
title = module_arg
end
if not i18n then
i18nPath = title .. "/i18n"
i18n = require(i18nPath).init(aliasesP)
end
end
p.claimCommands = {
property = "property",
properties = "properties",
qualifier = "qualifier",
qualifiers = "qualifiers",
reference = "reference",
references = "references"
}
p.generalCommands = {
label = "label",
title = "title",
description = "description",
alias = "alias",
aliases = "aliases",
badge = "badge",
badges = "badges"
}
p.flags = {
linked = "linked",
short = "short",
raw = "raw",
multilanguage = "multilanguage",
unit = "unit",
-------------
preferred = "preferred",
normal = "normal",
deprecated = "deprecated",
best = "best",
future = "future",
current = "current",
former = "former",
edit = "edit",
editAtEnd = "edit@end",
mdy = "mdy",
single = "single",
sourced = "sourced"
}
p.args = {
eid = "eid",
page = "page",
date = "date",
globalSiteId = "globalSiteId"
}
local aliasesP = {
coord = "P625",
-----------------------
image = "P18",
author = "P50",
authorNameString = "P2093",
publisher = "P123",
importedFrom = "P143",
wikimediaImportURL = "P4656",
statedIn = "P248",
pages = "P304",
language = "P407",
hasPart = "P527",
publicationDate = "P577",
startTime = "P580",
endTime = "P582",
chapter = "P792",
retrieved = "P813",
referenceURL = "P854",
sectionVerseOrParagraph = "P958",
archiveURL = "P1065",
title = "P1476",
formatterURL = "P1630",
quote = "P1683",
shortName = "P1813",
definingFormula = "P2534",
archiveDate = "P2960",
inferredFrom = "P3452",
typeOfReference = "P3865",
column = "P3903",
subjectNamedAs = "P1810",
wikidataProperty = "P1687",
publishedIn = "P1433"
}
local aliasesQ = {
percentage = "Q11229",
prolepticJulianCalendar = "Q1985786",
citeWeb = "Q5637226",
citeQ = "Q22321052"
}
local parameters = {
property = "%p",
qualifier = "%q",
reference = "%r",
alias = "%a",
badge = "%b",
separator = "%s",
general = "%x"
}
local formats = {
property = "%p[%s][%r]",
qualifier = "%q[%s][%r]",
reference = "%r",
propertyWithQualifier = "%p[ <span style=\"font-size:85\\%\">(%q)</span>][%s][%r]",
alias = "%a[%s]",
badge = "%b[%s]"
}
local hookNames = { -- {level_1, level_2}
[parameters.property] = {"getProperty"},
[parameters.reference] = {"getReferences", "getReference"},
[parameters.qualifier] = {"getAllQualifiers"},
[parameters.qualifier.."\\d"] = {"getQualifiers", "getQualifier"},
[parameters.alias] = {"getAlias"},
[parameters.badge] = {"getBadge"}
}
-- default value objects, should NOT be mutated but instead copied
local defaultSeparators = {
["sep"] = {" "},
["sep%s"] = {","},
["sep%q"] = {"; "},
["sep%q\\d"] = {", "},
["sep%r"] = nil, -- none
["punc"] = nil -- none
}
local rankTable = {
["preferred"] = 1,
["normal"] = 2,
["deprecated"] = 3
}
local function replaceAlias(id)
if aliasesP[id] then
id = aliasesP[id]
end
return id
end
local function errorText(code, ...)
local text = i18n["errors"][code]
if arg then text = mw.ustring.format(text, unpack(arg)) end
return text
end
local function throwError(errorMessage, ...)
error(errorText(errorMessage, unpack(arg)))
end
local function replaceDecimalMark(num)
return mw.ustring.gsub(num, "[.]", i18n['numeric']['decimal-mark'], 1)
end
local function padZeros(num, numDigits)
local numZeros
local negative = false
if num < 0 then
negative = true
num = num * -1
end
num = tostring(num)
numZeros = numDigits - num:len()
for _ = 1, numZeros do
num = "0"..num
end
if negative then
num = "-"..num
end
return num
end
local function replaceSpecialChar(chr)
if chr == '_' then
-- replace underscores with spaces
return ' '
else
return chr
end
end
local function replaceSpecialChars(str)
local chr
local esc = false
local strOut = ""
for i = 1, #str do
chr = str:sub(i,i)
if not esc then
if chr == '\\' then
esc = true
else
strOut = strOut .. replaceSpecialChar(chr)
end
else
strOut = strOut .. chr
esc = false
end
end
return strOut
end
local function buildWikilink(target, label)
if not label or target == label then
return "[[" .. target .. "]]"
else
return "[[" .. target .. "|" .. label .. "]]"
end
end
-- used to make frame.args mutable, to replace #frame.args (which is always 0)
-- with the actual amount and to simply copy tables
local function copyTable(tIn)
if not tIn then
return nil
end
local tOut = {}
for i, v in pairs(tIn) do
tOut[i] = v
end
return tOut
end
-- used to merge output arrays together;
-- note that it currently mutates the first input array
local function mergeArrays(a1, a2)
for i = 1, #a2 do
a1[#a1 + 1] = a2[i]
end
return a1
end
local function split(str, del)
local out = {}
local i, j = str:find(del)
if i and j then
out[1] = str:sub(1, i - 1)
out[2] = str:sub(j + 1)
else
out[1] = str
end
return out
end
local function parseWikidataURL(url)
local id
if url:match('^http[s]?://') then
id = split(url, "Q")
if id[2] then
return "Q" .. id[2]
end
end
return nil
end
local function parseDate(dateStr, precision)
precision = precision or "d"
local i, j, index, ptr
local parts = {nil, nil, nil}
if dateStr == nil then
return parts[1], parts[2], parts[3] -- year, month, day
end
-- 'T' for snak values, '/' for outputs with '/Julian' attached
i, j = dateStr:find("[T/]")
if i then
dateStr = dateStr:sub(1, i-1)
end
local from = 1
if dateStr:sub(1,1) == "-" then
-- this is a negative number, look further ahead
from = 2
end
index = 1
ptr = 1
i, j = dateStr:find("-", from)
if i then
-- year
parts[index] = tonumber(dateStr:sub(ptr, i-1), 10) -- explicitly give base 10 to prevent error
if parts[index] == -0 then
parts[index] = tonumber("0") -- for some reason, 'parts[index] = 0' may actually store '-0', so parse from string instead
end
if precision == "y" then
-- we're done
return parts[1], parts[2], parts[3] -- year, month, day
end
index = index + 1
ptr = i + 1
i, j = dateStr:find("-", ptr)
if i then
-- month
parts[index] = tonumber(dateStr:sub(ptr, i-1), 10)
if precision == "m" then
-- we're done
return parts[1], parts[2], parts[3] -- year, month, day
end
index = index + 1
ptr = i + 1
end
end
if dateStr:sub(ptr) ~= "" then
-- day if we have month, month if we have year, or year
parts[index] = tonumber(dateStr:sub(ptr), 10)
end
return parts[1], parts[2], parts[3] -- year, month, day
end
local function datePrecedesDate(aY, aM, aD, bY, bM, bD)
if aY == nil or bY == nil then
return nil
end
aM = aM or 1
aD = aD or 1
bM = bM or 1
bD = bD or 1
if aY < bY then
return true
end
if aY > bY then
return false
end
if aM < bM then
return true
end
if aM > bM then
return false
end
if aD < bD then
return true
end
return false
end
local function getHookName(param, index)
if hookNames[param] then
return hookNames[param][index]
elseif param:len() > 2 then
return hookNames[param:sub(1, 2).."\\d"][index]
else
return nil
end
end
local function alwaysTrue()
return true
end
-- The following function parses a format string.
--
-- The example below shows how a parsed string is structured in memory.
-- Variables other than 'str' and 'child' are left out for clarity's sake.
--
-- Example:
-- "A %p B [%s[%q1]] C [%r] D"
--
-- Structure:
-- [
-- {
-- str = "A "
-- },
-- {
-- str = "%p"
-- },
-- {
-- str = " B ",
-- child =
-- [
-- {
-- str = "%s",
-- child =
-- [
-- {
-- str = "%q1"
-- }
-- ]
-- }
-- ]
-- },
-- {
-- str = " C ",
-- child =
-- [
-- {
-- str = "%r"
-- }
-- ]
-- },
-- {
-- str = " D"
-- }
-- ]
--
local function parseFormat(str)
local chr, esc, param, root, cur, prev, new
local params = {}
local function newObject(array)
local obj = {} -- new object
obj.str = ""
array[#array + 1] = obj -- array{object}
obj.parent = array
return obj
end
local function endParam()
if param > 0 then
if cur.str ~= "" then
cur.str = "%"..cur.str
cur.param = true
params[cur.str] = true
cur.parent.req[cur.str] = true
prev = cur
cur = newObject(cur.parent)
end
param = 0
end
end
root = {} -- array
root.req = {}
cur = newObject(root)
prev = nil
esc = false
param = 0
for i = 1, #str do
chr = str:sub(i,i)
if not esc then
if chr == '\\' then
endParam()
esc = true
elseif chr == '%' then
endParam()
if cur.str ~= "" then
cur = newObject(cur.parent)
end
param = 2
elseif chr == '[' then
endParam()
if prev and cur.str == "" then
table.remove(cur.parent)
cur = prev
end
cur.child = {} -- new array
cur.child.req = {}
cur.child.parent = cur
cur = newObject(cur.child)
elseif chr == ']' then
endParam()
if cur.parent.parent then
new = newObject(cur.parent.parent.parent)
if cur.str == "" then
table.remove(cur.parent)
end
cur = new
end
else
if param > 1 then
param = param - 1
elseif param == 1 then
if not chr:match('%d') then
endParam()
end
end
cur.str = cur.str .. replaceSpecialChar(chr)
end
else
cur.str = cur.str .. chr
esc = false
end
prev = nil
end
endParam()
-- make sure that at least one required parameter has been defined
if not next(root.req) then
throwError("missing-required-parameter")
end
-- make sure that the separator parameter "%s" is not amongst the required parameters
if root.req[parameters.separator] then
throwError("extra-required-parameter", parameters.separator)
end
return root, params
end
local function sortOnRank(claims)
local rankPos
local ranks = {{}, {}, {}, {}} -- preferred, normal, deprecated, (default)
local sorted = {}
for _, v in ipairs(claims) do
rankPos = rankTable[v.rank] or 4
ranks[rankPos][#ranks[rankPos] + 1] = v
end
sorted = ranks[1]
sorted = mergeArrays(sorted, ranks[2])
sorted = mergeArrays(sorted, ranks[3])
return sorted
end
local function isValueInTable(searchedItem, inputTable)
for _, item in pairs(inputTable) do
if item == searchedItem then
return true
end
end
return false
end
local Config = {}
-- allows for recursive calls
function Config:new()
local cfg = {}
setmetatable(cfg, self)
self.__index = self
cfg.separators = {
-- single value objects wrapped in arrays so that we can pass by reference
["sep"] = {copyTable(defaultSeparators["sep"])},
["sep%s"] = {copyTable(defaultSeparators["sep%s"])},
["sep%q"] = {copyTable(defaultSeparators["sep%q"])},
["sep%r"] = {copyTable(defaultSeparators["sep%r"])},
["punc"] = {copyTable(defaultSeparators["punc"])}
}
cfg.entity = nil
cfg.entityID = nil
cfg.propertyID = nil
cfg.propertyValue = nil
cfg.qualifierIDs = {}
cfg.qualifierIDsAndValues = {}
cfg.bestRank = true
cfg.ranks = {true, true, false} -- preferred = true, normal = true, deprecated = false
cfg.foundRank = #cfg.ranks
cfg.flagBest = false
cfg.flagRank = false
cfg.periods = {true, true, true} -- future = true, current = true, former = true
cfg.flagPeriod = false
cfg.atDate = {parseDate(os.date('!%Y-%m-%d'))} -- today as {year, month, day}
cfg.mdyDate = false
cfg.singleClaim = false
cfg.sourcedOnly = false
cfg.editable = false
cfg.editAtEnd = false
cfg.inSitelinks = false
cfg.langCode = mw.language.getContentLanguage().code
cfg.langName = mw.language.fetchLanguageName(cfg.langCode, cfg.langCode)
cfg.langObj = mw.language.new(cfg.langCode)
cfg.siteID = mw.wikibase.getGlobalSiteId()
cfg.states = {}
cfg.states.qualifiersCount = 0
cfg.curState = nil
cfg.prefetchedRefs = nil
return cfg
end
local State = {}
function State:new(cfg, type)
local stt = {}
setmetatable(stt, self)
self.__index = self
stt.conf = cfg
stt.type = type
stt.results = {}
stt.parsedFormat = {}
stt.separator = {}
stt.movSeparator = {}
stt.puncMark = {}
stt.linked = false
stt.rawValue = false
stt.shortName = false
stt.anyLanguage = false
stt.unitOnly = false
stt.singleValue = false
return stt
end
-- if id == nil then item connected to current page is used
function Config:getLabel(id, raw, link, short)
local label = nil
local prefix, title= "", nil
if not id then
id = mw.wikibase.getEntityIdForCurrentPage()
if not id then
return ""
end
end
id = id:upper() -- just to be sure
if raw then
-- check if given id actually exists
if mw.wikibase.isValidEntityId(id) and mw.wikibase.entityExists(id) then
label = id
end
prefix, title = "d:Special:EntityPage/", label -- may be nil
else
-- try short name first if requested
if short then
label = p._property{aliasesP.shortName, [p.args.eid] = id} -- get short name
if label == "" then
label = nil
end
end
-- get label
if not label then
label = mw.wikibase.getLabel(id)
end
end
if not label then
label = ""
elseif link then
-- build a link if requested
if not title then
if id:sub(1,1) == "Q" then
title = mw.wikibase.getSitelink(id)
elseif id:sub(1,1) == "P" then
-- properties have no sitelink, link to Wikidata instead
prefix, title = "d:Special:EntityPage/", id
end
end
label = mw.text.nowiki(label) -- escape raw label text so it cannot be wikitext markup
if title then
label = buildWikilink(prefix .. title, label)
end
end
return label
end
function Config:getEditIcon()
local value = ""
local prefix = ""
local front = " "
local back = ""
if self.entityID:sub(1,1) == "P" then
prefix = "Property:"
end
if self.editAtEnd then
front = '<span style="float:'
if self.langObj:isRTL() then
front = front .. 'left'
else
front = front .. 'right'
end
front = front .. '">'
back = '</span>'
end
value = "[[File:OOjs UI icon edit-ltr-progressive.svg|frameless|text-top|10px|alt=" .. i18n['info']['edit-on-wikidata'] .. "|link=https://www.wikidata.org/wiki/" .. prefix .. self.entityID .. "?uselang=" .. self.langCode
if self.propertyID then
value = value .. "#" .. self.propertyID
elseif self.inSitelinks then
value = value .. "#sitelinks-wikipedia"
end
value = value .. "|" .. i18n['info']['edit-on-wikidata'] .. "]]"
return front .. value .. back
end
-- used to create the final output string when it's all done, so that for references the
-- function extensionTag("ref", ...) is only called when they really ended up in the final output
function Config:concatValues(valuesArray)
local outString = ""
local j, skip
for i = 1, #valuesArray do
-- check if this is a reference
if valuesArray[i].refHash then
j = i - 1
skip = false
-- skip this reference if it is part of a continuous row of references that already contains the exact same reference
while valuesArray[j] and valuesArray[j].refHash do
if valuesArray[i].refHash == valuesArray[j].refHash then
skip = true
break
end
j = j - 1
end
if not skip then
-- add <ref> tag with the reference's hash as its name (to deduplicate references)
outString = outString .. mw.getCurrentFrame():extensionTag("ref", valuesArray[i][1], {name = valuesArray[i].refHash})
end
else
outString = outString .. valuesArray[i][1]
end
end
return outString
end
function Config:convertUnit(unit, raw, link, short, unitOnly)
local space = " "
local label = ""
local itemID
if unit == "" or unit == "1" then
return nil
end
if unitOnly then
space = ""
end
itemID = parseWikidataURL(unit)
if itemID then
if itemID == aliasesQ.percentage then
return "%"
else
label = self:getLabel(itemID, raw, link, short)
if label ~= "" then
return space .. label
end
end
end
return ""
end
function State:getValue(snak)
return self.conf:getValue(snak, self.rawValue, self.linked, self.shortName, self.anyLanguage, self.unitOnly, false, self.type:sub(1,2))
end
function Config:getValue(snak, raw, link, short, anyLang, unitOnly, noSpecial, type)
if snak.snaktype == 'value' then
local datatype = snak.datavalue.type
local subtype = snak.datatype
local datavalue = snak.datavalue.value
if datatype == 'string' then
if subtype == 'url' and link then
-- create link explicitly
if raw then
-- will render as a linked number like [1]
return "[" .. datavalue .. "]"
else
return "[" .. datavalue .. " " .. datavalue .. "]"
end
elseif subtype == 'commonsMedia' then
if link then
return buildWikilink("c:File:" .. datavalue, datavalue)
elseif not raw then
return "[[File:" .. datavalue .. "]]"
else
return datavalue
end
elseif subtype == 'geo-shape' and link then
return buildWikilink("c:" .. datavalue, datavalue)
elseif subtype == 'math' and not raw then
local attribute = nil
if (type == parameters.property or (type == parameters.qualifier and self.propertyID == aliasesP.hasPart)) and snak.property == aliasesP.definingFormula then
attribute = {qid = self.entityID}
end
return mw.getCurrentFrame():extensionTag("math", datavalue, attribute)
elseif subtype == 'external-id' and link then
local url = p._property{aliasesP.formatterURL, [p.args.eid] = snak.property} -- get formatter URL
if url ~= "" then
url = mw.ustring.gsub(url, "$1", datavalue)
return "[" .. url .. " " .. datavalue .. "]"
else
return datavalue
end
else
return datavalue
end
elseif datatype == 'monolingualtext' then
if anyLang or datavalue['language'] == self.langCode then
return datavalue['text']
else
return nil
end
elseif datatype == 'quantity' then
local value = ""
local unit
if not unitOnly then
-- get value and strip + signs from front
value = mw.ustring.gsub(datavalue['amount'], "^%+(.+)$", "%1")
if raw then
return value
end
-- replace decimal mark based on locale
value = replaceDecimalMark(value)
-- add delimiters for readability
value = i18n.addDelimiters(value)
end
unit = self:convertUnit(datavalue['unit'], raw, link, short, unitOnly)
if unit then
value = value .. unit
end
return value
elseif datatype == 'time' then
local y, m, d, p, yDiv, yRound, yFull, value, calendarID, dateStr
local yFactor = 1
local sign = 1
local prefix = ""
local suffix = ""
local mayAddCalendar = false
local calendar = ""
local precision = datavalue['precision']
if precision == 11 then
p = "d"
elseif precision == 10 then
p = "m"
else
p = "y"
yFactor = 10^(9-precision)
end
y, m, d = parseDate(datavalue['time'], p)
if y < 0 then
sign = -1
y = y * sign
end
-- if precision is tens/hundreds/thousands/millions/billions of years
if precision <= 8 then
yDiv = y / yFactor
-- if precision is tens/hundreds/thousands of years
if precision >= 6 then
mayAddCalendar = true
if precision <= 7 then
-- round centuries/millenniums up (e.g. 20th century or 3rd millennium)
yRound = math.ceil(yDiv)
if not raw then
if precision == 6 then
suffix = i18n['datetime']['suffixes']['millennium']
else
suffix = i18n['datetime']['suffixes']['century']
end
suffix = i18n.getOrdinalSuffix(yRound) .. suffix
else
-- if not verbose, take the first year of the century/millennium
-- (e.g. 1901 for 20th century or 2001 for 3rd millennium)
yRound = (yRound - 1) * yFactor + 1
end
else
-- precision == 8
-- round decades down (e.g. 2010s)
yRound = math.floor(yDiv) * yFactor
if not raw then
prefix = i18n['datetime']['prefixes']['decade-period']
suffix = i18n['datetime']['suffixes']['decade-period']
end
end
if raw and sign < 0 then
-- if BCE then compensate for "counting backwards"
-- (e.g. -2019 for 2010s BCE, -2000 for 20th century BCE or -3000 for 3rd millennium BCE)
yRound = yRound + yFactor - 1
end
else
local yReFactor, yReDiv, yReRound
-- round to nearest for tens of thousands of years or more
yRound = math.floor(yDiv + 0.5)
if yRound == 0 then
if precision <= 2 and y ~= 0 then
yReFactor = 1e6
yReDiv = y / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to millions of years only if we have a whole number of them
precision = 3
yFactor = yReFactor
yRound = yReRound
end
end
if yRound == 0 then
-- otherwise, take the unrounded (original) number of years
precision = 5
yFactor = 1
yRound = y
mayAddCalendar = true
end
end
if precision >= 1 and y ~= 0 then
yFull = yRound * yFactor
yReFactor = 1e9
yReDiv = yFull / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to billions of years if we're in that range
precision = 0
yFactor = yReFactor
yRound = yReRound
else
yReFactor = 1e6
yReDiv = yFull / yReFactor
yReRound = math.floor(yReDiv + 0.5)
if yReDiv == yReRound then
-- change precision to millions of years if we're in that range
precision = 3
yFactor = yReFactor
yRound = yReRound
end
end
end
if not raw then
if precision == 3 then
suffix = i18n['datetime']['suffixes']['million-years']
elseif precision == 0 then
suffix = i18n['datetime']['suffixes']['billion-years']
else
yRound = yRound * yFactor
if yRound == 1 then
suffix = i18n['datetime']['suffixes']['year']
else
suffix = i18n['datetime']['suffixes']['years']
end
end
else
yRound = yRound * yFactor
end
end
else
yRound = y
mayAddCalendar = true
end
if mayAddCalendar then
calendarID = parseWikidataURL(datavalue['calendarmodel'])
if calendarID and calendarID == aliasesQ.prolepticJulianCalendar then
if not raw then
if link then
calendar = " ("..buildWikilink(i18n['datetime']['julian-calendar'], i18n['datetime']['julian'])..")"
else
calendar = " ("..i18n['datetime']['julian']..")"
end
else
calendar = "/"..i18n['datetime']['julian']
end
end
end
if not raw then
local ce = nil
if sign < 0 then
ce = i18n['datetime']['BCE']
elseif precision <= 5 then
ce = i18n['datetime']['CE']
end
if ce then
if link then
ce = buildWikilink(i18n['datetime']['common-era'], ce)
end
suffix = suffix .. " " .. ce
end
value = tostring(yRound)
if m then
dateStr = self.langObj:formatDate("F", "1-"..m.."-1")
if d then
if self.mdyDate then
dateStr = dateStr .. " " .. d .. ","
else
dateStr = d .. " " .. dateStr
end
end
value = dateStr .. " " .. value
end
value = prefix .. value .. suffix .. calendar
else
value = padZeros(yRound * sign, 4)
if m then
value = value .. "-" .. padZeros(m, 2)
if d then
value = value .. "-" .. padZeros(d, 2)
end
end
value = value .. calendar
end
return value
elseif datatype == 'globecoordinate' then
-- logic from https://github.com/DataValues/Geo (v4.0.1)
local precision, unitsPerDegree, numDigits, strFormat, value, globe
local latitude, latConv, latValue, latLink
local longitude, lonConv, lonValue, lonLink
local latDirection, latDirectionN, latDirectionS, latDirectionEN
local lonDirection, lonDirectionE, lonDirectionW, lonDirectionEN
local degSymbol, minSymbol, secSymbol, separator
local latDegrees = nil
local latMinutes = nil
local latSeconds = nil
local lonDegrees = nil
local lonMinutes = nil
local lonSeconds = nil
local latDegSym = ""
local latMinSym = ""
local latSecSym = ""
local lonDegSym = ""
local lonMinSym = ""
local lonSecSym = ""
local latDirectionEN_N = "N"
local latDirectionEN_S = "S"
local lonDirectionEN_E = "E"
local lonDirectionEN_W = "W"
if not raw then
latDirectionN = i18n['coord']['latitude-north']
latDirectionS = i18n['coord']['latitude-south']
lonDirectionE = i18n['coord']['longitude-east']
lonDirectionW = i18n['coord']['longitude-west']
degSymbol = i18n['coord']['degrees']
minSymbol = i18n['coord']['minutes']
secSymbol = i18n['coord']['seconds']
separator = i18n['coord']['separator']
else
latDirectionN = latDirectionEN_N
latDirectionS = latDirectionEN_S
lonDirectionE = lonDirectionEN_E
lonDirectionW = lonDirectionEN_W
degSymbol = "/"
minSymbol = "/"
secSymbol = "/"
separator = "/"
end
latitude = datavalue['latitude']
longitude = datavalue['longitude']
if latitude < 0 then
latDirection = latDirectionS
latDirectionEN = latDirectionEN_S
latitude = math.abs(latitude)
else
latDirection = latDirectionN
latDirectionEN = latDirectionEN_N
end
if longitude < 0 then
lonDirection = lonDirectionW
lonDirectionEN = lonDirectionEN_W
longitude = math.abs(longitude)
else
lonDirection = lonDirectionE
lonDirectionEN = lonDirectionEN_E
end
precision = datavalue['precision']
if not precision or precision <= 0 then
precision = 1 / 3600 -- precision not set (correctly), set to arcsecond
end
-- remove insignificant detail
latitude = math.floor(latitude / precision + 0.5) * precision
longitude = math.floor(longitude / precision + 0.5) * precision
if precision >= 1 - (1 / 60) and precision < 1 then
precision = 1
elseif precision >= (1 / 60) - (1 / 3600) and precision < (1 / 60) then
precision = 1 / 60
end
if precision >= 1 then
unitsPerDegree = 1
elseif precision >= (1 / 60) then
unitsPerDegree = 60
else
unitsPerDegree = 3600
end
numDigits = math.ceil(-math.log10(unitsPerDegree * precision))
if numDigits <= 0 then
numDigits = tonumber("0") -- for some reason, 'numDigits = 0' may actually store '-0', so parse from string instead
end
strFormat = "%." .. numDigits .. "f"
if precision >= 1 then
latDegrees = strFormat:format(latitude)
lonDegrees = strFormat:format(longitude)
if not raw then
latDegSym = replaceDecimalMark(latDegrees) .. degSymbol
lonDegSym = replaceDecimalMark(lonDegrees) .. degSymbol
else
latDegSym = latDegrees .. degSymbol
lonDegSym = lonDegrees .. degSymbol
end
else
latConv = math.floor(latitude * unitsPerDegree * 10^numDigits + 0.5) / 10^numDigits
lonConv = math.floor(longitude * unitsPerDegree * 10^numDigits + 0.5) / 10^numDigits
if precision >= (1 / 60) then
latMinutes = latConv
lonMinutes = lonConv
else
latSeconds = latConv
lonSeconds = lonConv
latMinutes = math.floor(latSeconds / 60)
lonMinutes = math.floor(lonSeconds / 60)
latSeconds = strFormat:format(latSeconds - (latMinutes * 60))
lonSeconds = strFormat:format(lonSeconds - (lonMinutes * 60))
if not raw then
latSecSym = replaceDecimalMark(latSeconds) .. secSymbol
lonSecSym = replaceDecimalMark(lonSeconds) .. secSymbol
else
latSecSym = latSeconds .. secSymbol
lonSecSym = lonSeconds .. secSymbol
end
end
latDegrees = math.floor(latMinutes / 60)
lonDegrees = math.floor(lonMinutes / 60)
latDegSym = latDegrees .. degSymbol
lonDegSym = lonDegrees .. degSymbol
latMinutes = latMinutes - (latDegrees * 60)
lonMinutes = lonMinutes - (lonDegrees * 60)
if precision >= (1 / 60) then
latMinutes = strFormat:format(latMinutes)
lonMinutes = strFormat:format(lonMinutes)
if not raw then
latMinSym = replaceDecimalMark(latMinutes) .. minSymbol
lonMinSym = replaceDecimalMark(lonMinutes) .. minSymbol
else
latMinSym = latMinutes .. minSymbol
lonMinSym = lonMinutes .. minSymbol
end
else
latMinSym = latMinutes .. minSymbol
lonMinSym = lonMinutes .. minSymbol
end
end
latValue = latDegSym .. latMinSym .. latSecSym .. latDirection
lonValue = lonDegSym .. lonMinSym .. lonSecSym .. lonDirection
value = latValue .. separator .. lonValue
if link then
globe = parseWikidataURL(datavalue['globe'])
if globe then
globe = mw.wikibase.getLabelByLang(globe, "en"):lower()
else
globe = "earth"
end
latLink = table.concat({latDegrees, latMinutes, latSeconds}, "_")
lonLink = table.concat({lonDegrees, lonMinutes, lonSeconds}, "_")
value = "[https://geohack.toolforge.org/geohack.php?language="..self.langCode.."¶ms="..latLink.."_"..latDirectionEN.."_"..lonLink.."_"..lonDirectionEN.."_globe:"..globe.." "..value.."]"
end
return value
elseif datatype == 'wikibase-entityid' then
local label
local itemID = datavalue['numeric-id']
if subtype == 'wikibase-item' then
itemID = "Q" .. itemID
elseif subtype == 'wikibase-property' then
itemID = "P" .. itemID
else
return '<strong class="error">' .. errorText('unknown-data-type', subtype) .. '</strong>'
end
label = self:getLabel(itemID, raw, link, short)
if label == "" then
label = nil
end
return label
else
return '<strong class="error">' .. errorText('unknown-data-type', datatype) .. '</strong>'
end
elseif snak.snaktype == 'somevalue' and not noSpecial then
if raw then
return " " -- single space represents 'somevalue'
else
return i18n['values']['unknown']
end
elseif snak.snaktype == 'novalue' and not noSpecial then
if raw then
return "" -- empty string represents 'novalue'
else
return i18n['values']['none']
end
else
return nil
end
end
function Config:getSingleRawQualifier(claim, qualifierID)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[qualifierID] end
if qualifiers and qualifiers[1] then
return self:getValue(qualifiers[1], true) -- raw = true
else
return nil
end
end
function Config:snakEqualsValue(snak, value)
local snakValue = self:getValue(snak, true) -- raw = true
if snakValue and snak.snaktype == 'value' and snak.datavalue.type == 'wikibase-entityid' then value = value:upper() end
return snakValue == value
end
function Config:setRank(rank)
local rankPos
if rank == p.flags.best then
self.bestRank = true
self.flagBest = true -- mark that 'best' flag was given
return
end
if rank:sub(1,9) == p.flags.preferred then
rankPos = 1
elseif rank:sub(1,6) == p.flags.normal then
rankPos = 2
elseif rank:sub(1,10) == p.flags.deprecated then
rankPos = 3
else
return
end
-- one of the rank flags was given, check if another one was given before
if not self.flagRank then
self.ranks = {false, false, false} -- no other rank flag given before, so unset ranks
self.bestRank = self.flagBest -- unsets bestRank only if 'best' flag was not given before
self.flagRank = true -- mark that a rank flag was given
end
if rank:sub(-1) == "+" then
for i = rankPos, 1, -1 do
self.ranks[i] = true
end
elseif rank:sub(-1) == "-" then
for i = rankPos, #self.ranks do
self.ranks[i] = true
end
else
self.ranks[rankPos] = true
end
end
function Config:setPeriod(period)
local periodPos
if period == p.flags.future then
periodPos = 1
elseif period == p.flags.current then
periodPos = 2
elseif period == p.flags.former then
periodPos = 3
else
return
end
-- one of the period flags was given, check if another one was given before
if not self.flagPeriod then
self.periods = {false, false, false} -- no other period flag given before, so unset periods
self.flagPeriod = true -- mark that a period flag was given
end
self.periods[periodPos] = true
end
function Config:qualifierMatches(claim, id, value)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[id] end
if qualifiers then
for _, v in pairs(qualifiers) do
if self:snakEqualsValue(v, value) then
return true
end
end
elseif value == "" then
-- if the qualifier is not present then treat it the same as the special value 'novalue'
return true
end
return false
end
function Config:rankMatches(rankPos)
if self.bestRank then
return (self.ranks[rankPos] and self.foundRank >= rankPos)
else
return self.ranks[rankPos]
end
end
function Config:timeMatches(claim)
local startTime = nil
local startTimeY = nil
local startTimeM = nil
local startTimeD = nil
local endTime = nil
local endTimeY = nil
local endTimeM = nil
local endTimeD = nil
if self.periods[1] and self.periods[2] and self.periods[3] then
-- any time
return true
end
startTime = self:getSingleRawQualifier(claim, aliasesP.startTime)
if startTime and startTime ~= "" and startTime ~= " " then
startTimeY, startTimeM, startTimeD = parseDate(startTime)
end
endTime = self:getSingleRawQualifier(claim, aliasesP.endTime)
if endTime and endTime ~= "" and endTime ~= " " then
endTimeY, endTimeM, endTimeD = parseDate(endTime)
end
if startTimeY ~= nil and endTimeY ~= nil and datePrecedesDate(endTimeY, endTimeM, endTimeD, startTimeY, startTimeM, startTimeD) then
-- invalidate end time if it precedes start time
endTimeY = nil
endTimeM = nil
endTimeD = nil
end
if self.periods[1] then
-- future
if startTimeY and datePrecedesDate(self.atDate[1], self.atDate[2], self.atDate[3], startTimeY, startTimeM, startTimeD) then
return true
end
end
if self.periods[2] then
-- current
if (startTimeY == nil or not datePrecedesDate(self.atDate[1], self.atDate[2], self.atDate[3], startTimeY, startTimeM, startTimeD)) and
(endTimeY == nil or datePrecedesDate(self.atDate[1], self.atDate[2], self.atDate[3], endTimeY, endTimeM, endTimeD)) then
return true
end
end
if self.periods[3] then
-- former
if endTimeY and not datePrecedesDate(self.atDate[1], self.atDate[2], self.atDate[3], endTimeY, endTimeM, endTimeD) then
return true
end
end
return false
end
function Config:processFlag(flag)
if not flag then
return false
end
if flag == p.flags.linked then
self.curState.linked = true
return true
elseif flag == p.flags.raw then
self.curState.rawValue = true
if self.curState == self.states[parameters.reference] then
-- raw reference values end with periods and require a separator (other than none)
self.separators["sep%r"][1] = {" "}
end
return true
elseif flag == p.flags.short then
self.curState.shortName = true
return true
elseif flag == p.flags.multilanguage then
self.curState.anyLanguage = true
return true
elseif flag == p.flags.unit then
self.curState.unitOnly = true
return true
elseif flag == p.flags.mdy then
self.mdyDate = true
return true
elseif flag == p.flags.single then
self.singleClaim = true
return true
elseif flag == p.flags.sourced then
self.sourcedOnly = true
return true
elseif flag == p.flags.edit then
self.editable = true
return true
elseif flag == p.flags.editAtEnd then
self.editable = true
self.editAtEnd = true
return true
elseif flag == p.flags.best or flag:match('^'..p.flags.preferred..'[+-]?$') or flag:match('^'..p.flags.normal..'[+-]?$') or flag:match('^'..p.flags.deprecated..'[+-]?$') then
self:setRank(flag)
return true
elseif flag == p.flags.future or flag == p.flags.current or flag == p.flags.former then
self:setPeriod(flag)
return true
elseif flag == "" then
-- ignore empty flags and carry on
return true
else
return false
end
end
function Config:processFlagOrCommand(flag)
local param = ""
if not flag then
return false
end
if flag == p.claimCommands.property or flag == p.claimCommands.properties then
param = parameters.property
elseif flag == p.claimCommands.qualifier or flag == p.claimCommands.qualifiers then
self.states.qualifiersCount = self.states.qualifiersCount + 1
param = parameters.qualifier .. self.states.qualifiersCount
self.separators["sep"..param] = {copyTable(defaultSeparators["sep%q\\d"])}
elseif flag == p.claimCommands.reference or flag == p.claimCommands.references then
param = parameters.reference
else
return self:processFlag(flag)
end
if self.states[param] then
return false
end
-- create a new state for each command
self.states[param] = State:new(self, param)
-- use "%x" as the general parameter name
self.states[param].parsedFormat = parseFormat(parameters.general) -- will be overwritten for param=="%p"
-- set the separator
self.states[param].separator = self.separators["sep"..param] -- will be nil for param=="%p", which will be set separately
if flag == p.claimCommands.property or flag == p.claimCommands.qualifier or flag == p.claimCommands.reference then
self.states[param].singleValue = true
end
self.curState = self.states[param]
return true
end
function Config:processSeparators(args)
local sep
for i, v in pairs(self.separators) do
if args[i] then
sep = replaceSpecialChars(args[i])
if sep ~= "" then
self.separators[i][1] = {sep}
else
self.separators[i][1] = nil
end
end
end
end
function Config:setFormatAndSeparators(state, parsedFormat)
state.parsedFormat = parsedFormat
state.separator = self.separators["sep"]
state.movSeparator = self.separators["sep"..parameters.separator]
state.puncMark = self.separators["punc"]
end
-- determines if a claim has references by prefetching them from the claim using getReferences,
-- which applies some filtering that determines if a reference is actually returned,
-- and caches the references for later use
function State:isSourced(claim)
self.conf.prefetchedRefs = self:getReferences(claim)
return (#self.conf.prefetchedRefs > 0)
end
function State:resetCaches()
-- any prefetched references of the previous claim must not be used
self.conf.prefetchedRefs = nil
end
function State:claimMatches(claim)
local matches, rankPos
-- first of all, reset any cached values used for the previous claim
self:resetCaches()
-- if a property value was given, check if it matches the claim's property value
if self.conf.propertyValue then
matches = self.conf:snakEqualsValue(claim.mainsnak, self.conf.propertyValue)
else
matches = true
end
-- if any qualifier values were given, check if each matches one of the claim's qualifier values
for i, v in pairs(self.conf.qualifierIDsAndValues) do
matches = (matches and self.conf:qualifierMatches(claim, i, v))
end
-- check if the claim's rank and time period match
rankPos = rankTable[claim.rank] or 4
matches = (matches and self.conf:rankMatches(rankPos) and self.conf:timeMatches(claim))
-- if only claims with references must be returned, check if this one has any
if self.conf.sourcedOnly then
matches = (matches and self:isSourced(claim)) -- prefetches and caches references
end
return matches, rankPos
end
function State:out()
local result -- collection of arrays with value objects
local valuesArray -- array with value objects
local sep = nil -- value object
local out = {} -- array with value objects
local function walk(formatTable, result)
local valuesArray = {} -- array with value objects
for i, v in pairs(formatTable.req) do
if not result[i] or not result[i][1] then
-- we've got no result for a parameter that is required on this level,
-- so skip this level (and its children) by returning an empty result
return {}
end
end
for _, v in ipairs(formatTable) do
if v.param then
valuesArray = mergeArrays(valuesArray, result[v.str])
elseif v.str ~= "" then
valuesArray[#valuesArray + 1] = {v.str}
end
if v.child then
valuesArray = mergeArrays(valuesArray, walk(v.child, result))
end
end
return valuesArray
end
-- iterate through the results from back to front, so that we know when to add separators
for i = #self.results, 1, -1 do
result = self.results[i]
-- if there is already some output, then add the separators
if #out > 0 then
sep = self.separator[1] -- fixed separator
result[parameters.separator] = {self.movSeparator[1]} -- movable separator
else
sep = nil
result[parameters.separator] = {self.puncMark[1]} -- optional punctuation mark
end
valuesArray = walk(self.parsedFormat, result)
if #valuesArray > 0 then
if sep then
valuesArray[#valuesArray + 1] = sep
end
out = mergeArrays(valuesArray, out)
end
end
-- reset state before next iteration
self.results = {}
return out
end
-- level 1 hook
function State:getProperty(claim)
local value = {self:getValue(claim.mainsnak)} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getQualifiers(claim, param)
local qualifiers
if claim.qualifiers then qualifiers = claim.qualifiers[self.conf.qualifierIDs[param]] end
if qualifiers then
-- iterate through claim's qualifier statements to collect their values;
-- return array with multiple value objects
return self.conf.states[param]:iterate(qualifiers, {[parameters.general] = hookNames[parameters.qualifier.."\\d"][2], count = 1}) -- pass qualifier state with level 2 hook
else
return {} -- return empty array
end
end
-- level 2 hook
function State:getQualifier(snak)
local value = {self:getValue(snak)} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getAllQualifiers(claim, param, result, hooks)
local out = {} -- array with value objects
local sep = self.conf.separators["sep"..parameters.qualifier][1] -- value object
-- iterate through the output of the separate "qualifier(s)" commands
for i = 1, self.conf.states.qualifiersCount do
-- if a hook has not been called yet, call it now
if not result[parameters.qualifier..i] then
self:callHook(parameters.qualifier..i, hooks, claim, result)
end
-- if there is output for this particular "qualifier(s)" command, then add it
if result[parameters.qualifier..i] and result[parameters.qualifier..i][1] then
-- if there is already some output, then add the separator
if #out > 0 and sep then
out[#out + 1] = sep
end
out = mergeArrays(out, result[parameters.qualifier..i])
end
end
return out
end
-- level 1 hook
function State:getReferences(claim)
if self.conf.prefetchedRefs then
-- return references that have been prefetched by isSourced
return self.conf.prefetchedRefs
end
if claim.references then
-- iterate through claim's reference statements to collect their values;
-- return array with multiple value objects
return self.conf.states[parameters.reference]:iterate(claim.references, {[parameters.general] = hookNames[parameters.reference][2], count = 1}) -- pass reference state with level 2 hook
else
return {} -- return empty array
end
end
-- level 2 hook
function State:getReference(statement)
local citeParamMapping = i18n['cite']['param-mapping']
local citeConfig = i18n['cite']['config']
local citeTypes = i18n['cite']['output-types']
-- will hold rendered properties of the reference which are not directly from statement.snaks,
-- Namely, these are a backup title from "subject named as" and a URL generated from an external ID.
local additionalProcessedProperties = {}
-- for each citation type, there will be an associative array that associates lists of rendered properties
-- to citation-template parameters
local groupedProcessedProperties = {}
-- like above, but only associates one rendered property to each parameter; if the above variable
-- contains more strings for a parameter, the strings will be assigned to numbered params (e.g. "author1")
local citeParams = {}
local citeErrors = {}
local referenceEmpty = true -- will be set to false if at least one parameter is left unremoved
local version = 11 -- increment this each time the below logic is changed to avoid conflict errors
if not statement.snaks then
return {}
end
-- don't use bot-added references referencing Wikimedia projects or containing "inferred from" (such references are not usable on Wikipedia)
if statement.snaks[aliasesP.importedFrom] or statement.snaks[aliasesP.wikimediaImportURL] or statement.snaks[aliasesP.inferredFrom] then
return {}
end
-- don't include "type of reference"
if statement.snaks[aliasesP.typeOfReference] then
statement.snaks[aliasesP.typeOfReference] = nil
end
-- don't include "image" to prevent littering
if statement.snaks[aliasesP.image] then
statement.snaks[aliasesP.image] = nil
end
-- don't include "language" if it is equal to the local one
if self:getReferenceDetail(statement.snaks, aliasesP.language) == self.conf.langName then
statement.snaks[aliasesP.language] = nil
end
if statement.snaks[aliasesP.statedIn] and not statement.snaks[aliasesP.referenceURL] then
-- "stated in" was given but "reference URL" was not.
-- get "Wikidata property" properties from the item in "stated in"
-- if any of the returned properties of the external-id datatype is in statement.snaks, generate a link from it and use the link in the reference
-- find the "Wikidata property" properties in the item from "stated in"
local wikidataPropertiesOfSource = mw.text.split(p._properties{p.flags.raw, aliasesP.wikidataProperty, [p.args.eid] = self.conf:getValue(statement.snaks[aliasesP.statedIn][1], true, false)}, ", ", true)
for i, wikidataPropertyOfSource in pairs(wikidataPropertiesOfSource) do
if statement.snaks[wikidataPropertyOfSource] and statement.snaks[wikidataPropertyOfSource][1].datatype == "external-id" then
local tempLink = self:getReferenceDetail(statement.snaks, wikidataPropertyOfSource, false, true) -- not raw, linked
if mw.ustring.match(tempLink, "^%[%Z- %Z+%]$") then -- getValue returned a URL in square brackets.
-- the link is in wiki markup, so strip the square brackets and the display text
-- gsub also returns another, discarted value, therefore the result is assigned to tempLink first
tempLink = mw.ustring.gsub(tempLink, "^%[(%Z-) %Z+%]$", "%1")
additionalProcessedProperties[aliasesP.referenceURL] = {tempLink}
statement.snaks[wikidataPropertyOfSource] = nil
break
end
end
end
end
-- don't include "subject named as", but use it as the title when "title" is not present but a URL is
if statement.snaks[aliasesP.subjectNamedAs] then
if not statement.snaks[aliasesP.title] and (statement.snaks[aliasesP.referenceURL] or additionalProcessedProperties[aliasesP.referenceURL]) then
additionalProcessedProperties[aliasesP.title] = {self:getReferenceDetail(statement.snaks, aliasesP.subjectNamedAs, false, false, true)} -- not raw, not linked, anyLang
end
statement.snaks[aliasesP.subjectNamedAs] = nil
end
-- initialize groupedProcessedProperties and citeParams
for _, citeType in ipairs(citeTypes) do
groupedProcessedProperties[citeType] = {}
citeParams[citeType] = {}
end
-- fill groupedProcessedProperties
for refProperty in pairs(statement.snaks) do
-- add the parameter to each matching type of citation
for _, citeType in ipairs(citeTypes) do
repeat -- just a simple wrapper to emulate "continue"
-- skip if there already have been errors
if citeErrors[citeType] then
break
end
-- set mappingKey and prefix
local mappingKey
local prefix = ""
if statement.snaks[refProperty][1].datatype == 'external-id' then
mappingKey = "external-id"
prefix = self.conf:getLabel(refProperty)
if prefix ~= "" then
prefix = prefix .. " "
end
else
mappingKey = refProperty
end
local paramName = citeParamMapping[citeType][mappingKey]
-- skip properties with empty parameter name
if paramName == "" then
break
end
referenceEmpty = false
-- handle unknown properties in the reference
if not paramName then
local error_message = errorText("unknown-property-in-ref", refProperty)
assert(error_message) -- Should not be nil
citeErrors[citeType] = error_message
break
end
-- set processedProperty
local processedProperty
local raw = false -- if the value is wanted raw
if isValueInTable(paramName, citeConfig[citeType]["raw-value-params"] or {}) then
raw = true
end
if isValueInTable(paramName, citeConfig[citeType]["numbered-params"] or {}) then
-- Multiple values may be given.
processedProperty = self:getReferenceDetails(statement.snaks, refProperty, raw, self.linked, true) -- anyLang = true
else
-- If multiple values are given, all but the first suitable one are discarted.
processedProperty = {self:getReferenceDetail(statement.snaks, refProperty, raw, self.linked and (statement.snaks[refProperty][1].datatype ~= 'url'), true)} -- link = true/false, anyLang = true
end
if #processedProperty == 0 then
break
end
-- add an entry to groupedProcessedProperties
if not groupedProcessedProperties[citeType][paramName] then
groupedProcessedProperties[citeType][paramName] = {}
end
for _, propertyValue in pairs(processedProperty) do
table.insert(groupedProcessedProperties[citeType][paramName], prefix .. propertyValue)
end
until true
end
end
-- handle additional properties
for refProperty in pairs(additionalProcessedProperties) do
for _, citeType in ipairs(citeTypes) do
repeat
-- skip if there already have been errors
if citeErrors[citeType] then
break
end
local paramName = citeParamMapping[citeType][refProperty]
-- handle unknown properties in the reference
if not paramName then
-- Skip this additional property, but do not cause an error.
break
end
if paramName == "" then
break
end
referenceEmpty = false
if not groupedProcessedProperties[citeType][paramName] then
groupedProcessedProperties[citeType][paramName] = {}
end
for _, propertyValue in pairs(additionalProcessedProperties[refProperty]) do
table.insert(groupedProcessedProperties[citeType][paramName], propertyValue)
end
until true
end
end
-- fill citeParams
for _, citeType in ipairs(citeTypes) do
for paramName, paramValues in pairs(groupedProcessedProperties[citeType]) do
if #paramValues == 1 or not isValueInTable(paramName, citeConfig[citeType]["numbered-params"] or {}) then
citeParams[citeType][paramName] = paramValues[1]
else
-- There is more than one value for this parameter - the values will
-- go into separate numbered parameters (e.g. "author1", "author2")
for paramNum, paramValue in pairs(paramValues) do
citeParams[citeType][paramName .. paramNum] = paramValue
end
end
end
end
-- handle missing mandatory parameters for the templates
for _, citeType in ipairs(citeTypes) do
for _, requiredCiteParam in pairs(citeConfig[citeType]["mandatory-params"] or {}) do
if not citeParams[citeType][requiredCiteParam] then -- The required param is not present.
if citeErrors[citeType] then -- Do not override the previous error, if it exists.
break
end
local error_message = errorText("missing-mandatory-param", requiredCiteParam)
assert(error_message) -- Should not be nil
citeErrors[citeType] = error_message
end
end
end
local citeTypeToUse = nil
-- choose the output template
for _, citeType in ipairs(citeTypes) do
if not citeErrors[citeType] then
citeTypeToUse = citeType
break
end
end
-- set refContent
local refContent = ""
if citeTypeToUse then
local templateToUse = citeConfig[citeTypeToUse]["template"]
local paramsToUse = citeParams[citeTypeToUse]
if not templateToUse or templateToUse == "" then
throwError("no-such-reference-template", tostring(templateToUse), i18nPath, citeTypeToUse)
end
-- if this module is being substituted then build a regular template call, otherwise expand the template
if mw.isSubsting() then
for i, v in pairs(paramsToUse) do
refContent = refContent .. "|" .. i .. "=" .. v
end
refContent = "{{" .. templateToUse .. refContent .. "}}"
else
xpcall(
function () refContent = mw.getCurrentFrame():expandTemplate{title=templateToUse, args=paramsToUse} end,
function () throwError("no-such-reference-template", templateToUse, i18nPath, citeTypeToUse) end
)
end
-- If the citation couldn't be displayed using any template, but is not empty (barring ignored propeties), throw an error.
elseif not referenceEmpty then
refContent = errorText("malformed-reference-header")
for _, citeType in ipairs(citeTypes) do
refContent = refContent .. errorText("template-failure-reason", citeConfig[citeType]["template"], citeErrors[citeType])
end
refContent = refContent .. errorText("malformed-reference-footer")
end
-- wrap refContent
local ref = {}
if refContent ~= "" then
ref = {refContent}
if not self.rawValue then
-- this should become a <ref> tag, so save the reference's hash for later
ref.refHash = "wikidata-" .. statement.hash .. "-v" .. (tonumber(i18n['version']) + version)
end
return {ref}
else
return {}
end
end
-- gets a detail of one particular type for a reference
function State:getReferenceDetail(snaks, dType, raw, link, anyLang)
local switchLang = anyLang
local value = nil
if not snaks[dType] then
return nil
end
-- if anyLang, first try the local language and otherwise any language
repeat
for _, v in ipairs(snaks[dType]) do
value = self.conf:getValue(v, raw, link, false, anyLang and not switchLang, false, true) -- noSpecial = true
if value then
break
end
end
if value or not anyLang then
break
end
switchLang = not switchLang
until anyLang and switchLang
return value
end
-- gets the details of one particular type for a reference
function State:getReferenceDetails(snaks, dType, raw, link, anyLang)
local values = {}
if not snaks[dType] then
return {}
end
for _, v in ipairs(snaks[dType]) do
-- if nil is returned then it will not be added to the table
values[#values + 1] = self.conf:getValue(v, raw, link, false, anyLang, false, true) -- noSpecial = true
end
return values
end
-- level 1 hook
function State:getAlias(object)
local value = object.value
local title = nil
if value and self.linked then
if self.conf.entityID:sub(1,1) == "Q" then
title = mw.wikibase.getSitelink(self.conf.entityID)
elseif self.conf.entityID:sub(1,1) == "P" then
title = "d:Property:" .. self.conf.entityID
end
if title then
value = buildWikilink(title, value)
end
end
value = {value} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
-- level 1 hook
function State:getBadge(value)
value = self.conf:getLabel(value, self.rawValue, self.linked, self.shortName)
if value == "" then
value = nil
end
value = {value} -- create one value object
if #value > 0 then
return {value} -- wrap the value object in an array and return it
else
return {} -- return empty array if there was no value
end
end
function State:callHook(param, hooks, statement, result)
local valuesArray, refHash
-- call a parameter's hook if it has been defined and if it has not been called before
if not result[param] and hooks[param] then
valuesArray = self[hooks[param]](self, statement, param, result, hooks) -- array with value objects
-- add to the result
if #valuesArray > 0 then
result[param] = valuesArray
result.count = result.count + 1
else
result[param] = {} -- an empty array to indicate that we've tried this hook already
return true -- miss == true
end
end
return false
end
-- iterate through claims, claim's qualifiers or claim's references to collect values
function State:iterate(statements, hooks, matchHook)
matchHook = matchHook or alwaysTrue
local matches = false
local rankPos = nil
local result, gotRequired
for _, v in ipairs(statements) do
-- rankPos will be nil for non-claim statements (e.g. qualifiers, references, etc.)
matches, rankPos = matchHook(self, v)
if matches then
result = {count = 0} -- collection of arrays with value objects
local function walk(formatTable)
local miss
for i2, v2 in pairs(formatTable.req) do
-- call a hook, adding its return value to the result
miss = self:callHook(i2, hooks, v, result)
if miss then
-- we miss a required value for this level, so return false
return false
end
if result.count == hooks.count then
-- we're done if all hooks have been called;
-- returning at this point breaks the loop
return true
end
end
for _, v2 in ipairs(formatTable) do
if result.count == hooks.count then
-- we're done if all hooks have been called;
-- returning at this point prevents further childs from being processed
return true
end
if v2.child then
walk(v2.child)
end
end
return true
end
gotRequired = walk(self.parsedFormat)
-- only append the result if we got values for all required parameters on the root level
if gotRequired then
-- if we have a rankPos (only with matchHook() for complete claims), then update the foundRank
if rankPos and self.conf.foundRank > rankPos then
self.conf.foundRank = rankPos
end
-- append the result
self.results[#self.results + 1] = result
-- break if we only need a single value
if self.singleValue then
break
end
end
end
end
return self:out()
end
local function getEntityId(arg, eid, page, allowOmitPropPrefix, globalSiteId)
local id = nil
local prop = nil
if arg then
if arg:sub(1,1) == ":" then
page = arg
eid = nil
elseif arg:sub(1,1):upper() == "Q" or arg:sub(1,9):lower() == "property:" or allowOmitPropPrefix then
eid = arg
page = nil
else
prop = arg
end
end
if eid then
if eid:sub(1,9):lower() == "property:" then
id = replaceAlias(mw.text.trim(eid:sub(10)))
if id:sub(1,1):upper() ~= "P" then
id = ""
end
else
id = replaceAlias(eid)
end
elseif page then
if page:sub(1,1) == ":" then
page = mw.text.trim(page:sub(2))
end
id = mw.wikibase.getEntityIdForTitle(page, globalSiteId) or ""
end
if not id then
id = mw.wikibase.getEntityIdForCurrentPage() or ""
end
id = id:upper()
if not mw.wikibase.isValidEntityId(id) then
id = ""
end
return id, prop
end
local function nextArg(args)
local arg = args[args.pointer]
if arg then
args.pointer = args.pointer + 1
return mw.text.trim(arg)
else
return nil
end
end
local function claimCommand(args, funcName)
local cfg = Config:new()
cfg:processFlagOrCommand(funcName) -- process first command (== function name)
local lastArg, parsedFormat, formatParams, claims, value
local hooks = {count = 0}
-- set the date if given;
-- must come BEFORE processing the flags
if args[p.args.date] then
cfg.atDate = {parseDate(args[p.args.date])}
cfg.periods = {false, true, false} -- change default time constraint to 'current'
end
-- process flags and commands
repeat
lastArg = nextArg(args)
until not cfg:processFlagOrCommand(lastArg)
-- get the entity ID from either the positional argument, the eid argument or the page argument
cfg.entityID, cfg.propertyID = getEntityId(lastArg, args[p.args.eid], args[p.args.page], false, args[p.args.globalSiteId])
if cfg.entityID == "" then
return "" -- we cannot continue without a valid entity ID
end
cfg.entity = mw.wikibase.getEntity(cfg.entityID)
if not cfg.propertyID then
cfg.propertyID = nextArg(args)
end
cfg.propertyID = replaceAlias(cfg.propertyID)
if not cfg.entity or not cfg.propertyID then
return "" -- we cannot continue without an entity or a property ID
end
cfg.propertyID = cfg.propertyID:upper()
if not cfg.entity.claims or not cfg.entity.claims[cfg.propertyID] then
return "" -- there is no use to continue without any claims
end
claims = cfg.entity.claims[cfg.propertyID]
if cfg.states.qualifiersCount > 0 then
-- do further processing if "qualifier(s)" command was given
if #args - args.pointer + 1 > cfg.states.qualifiersCount then
-- claim ID or literal value has been given
cfg.propertyValue = nextArg(args)
end
for i = 1, cfg.states.qualifiersCount do
-- check if given qualifier ID is an alias and add it
cfg.qualifierIDs[parameters.qualifier..i] = replaceAlias(nextArg(args) or ""):upper()
end
elseif cfg.states[parameters.reference] then
-- do further processing if "reference(s)" command was given
cfg.propertyValue = nextArg(args)
end
-- check for special property value 'somevalue' or 'novalue'
if cfg.propertyValue then
cfg.propertyValue = replaceSpecialChars(cfg.propertyValue)
if cfg.propertyValue ~= "" and mw.text.trim(cfg.propertyValue) == "" then
cfg.propertyValue = " " -- single space represents 'somevalue', whereas empty string represents 'novalue'
else
cfg.propertyValue = mw.text.trim(cfg.propertyValue)
end
end
-- parse the desired format, or choose an appropriate format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
elseif cfg.states.qualifiersCount > 0 then -- "qualifier(s)" command given
if cfg.states[parameters.property] then -- "propert(y|ies)" command given
parsedFormat, formatParams = parseFormat(formats.propertyWithQualifier)
else
parsedFormat, formatParams = parseFormat(formats.qualifier)
end
elseif cfg.states[parameters.property] then -- "propert(y|ies)" command given
parsedFormat, formatParams = parseFormat(formats.property)
else -- "reference(s)" command given
parsedFormat, formatParams = parseFormat(formats.reference)
end
-- if a "qualifier(s)" command and no "propert(y|ies)" command has been given, make the movable separator a semicolon
if cfg.states.qualifiersCount > 0 and not cfg.states[parameters.property] then
cfg.separators["sep"..parameters.separator][1] = {";"}
end
-- if only "reference(s)" has been given, set the default separator to none (except when raw)
if cfg.states[parameters.reference] and not cfg.states[parameters.property] and cfg.states.qualifiersCount == 0
and not cfg.states[parameters.reference].rawValue then
cfg.separators["sep"][1] = nil
end
-- if exactly one "qualifier(s)" command has been given, make "sep%q" point to "sep%q1" to make them equivalent
if cfg.states.qualifiersCount == 1 then
cfg.separators["sep"..parameters.qualifier] = cfg.separators["sep"..parameters.qualifier.."1"]
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
cfg:processSeparators(args)
-- define the hooks that should be called (getProperty, getQualifiers, getReferences);
-- only define a hook if both its command ("propert(y|ies)", "reference(s)", "qualifier(s)") and its parameter ("%p", "%r", "%q1", "%q2", "%q3") have been given
for i, v in pairs(cfg.states) do
-- e.g. 'formatParams["%q1"] or formatParams["%q"]' to define hook even if "%q1" was not defined to be able to build a complete value for "%q"
if formatParams[i] or formatParams[i:sub(1, 2)] then
hooks[i] = getHookName(i, 1)
hooks.count = hooks.count + 1
end
end
-- the "%q" parameter is not attached to a state, but is a collection of the results of multiple states (attached to "%q1", "%q2", "%q3", ...);
-- so if this parameter is given then this hook must be defined separately, but only if at least one "qualifier(s)" command has been given
if formatParams[parameters.qualifier] and cfg.states.qualifiersCount > 0 then
hooks[parameters.qualifier] = getHookName(parameters.qualifier, 1)
hooks.count = hooks.count + 1
end
-- create a state for "properties" if it doesn't exist yet, which will be used as a base configuration for each claim iteration;
-- must come AFTER defining the hooks
if not cfg.states[parameters.property] then
cfg.states[parameters.property] = State:new(cfg, parameters.property)
-- if the "single" flag has been given then this state should be equivalent to "property" (singular)
if cfg.singleClaim then
cfg.states[parameters.property].singleValue = true
end
end
-- if the "sourced" flag has been given then create a state for "reference" if it doesn't exist yet, using default values,
-- which must exist in order to be able to determine if a claim has any references;
-- must come AFTER defining the hooks
if cfg.sourcedOnly and not cfg.states[parameters.reference] then
cfg:processFlagOrCommand(p.claimCommands.reference) -- use singular "reference" to minimize overhead
end
-- set the parsed format and the separators (and optional punctuation mark);
-- must come AFTER creating the additonal states
cfg:setFormatAndSeparators(cfg.states[parameters.property], parsedFormat)
-- process qualifier matching values, analogous to cfg.propertyValue
for i, v in pairs(args) do
i = tostring(i)
if i:match('^[Pp]%d+$') or aliasesP[i] then
v = replaceSpecialChars(v)
-- check for special qualifier value 'somevalue'
if v ~= "" and mw.text.trim(v) == "" then
v = " " -- single space represents 'somevalue'
end
cfg.qualifierIDsAndValues[replaceAlias(i):upper()] = v
end
end
-- first sort the claims on rank to pre-define the order of output (preferred first, then normal, then deprecated)
claims = sortOnRank(claims)
-- then iterate through the claims to collect values
value = cfg:concatValues(cfg.states[parameters.property]:iterate(claims, hooks, State.claimMatches)) -- pass property state with level 1 hooks and matchHook
-- if desired, add a clickable icon that may be used to edit the returned values on Wikidata
if cfg.editable and value ~= "" then
value = value .. cfg:getEditIcon()
end
return value
end
local function generalCommand(args, funcName)
local cfg = Config:new()
cfg.curState = State:new(cfg)
local lastArg
local value = nil
repeat
lastArg = nextArg(args)
until not cfg:processFlag(lastArg)
-- get the entity ID from either the positional argument, the eid argument or the page argument
cfg.entityID = getEntityId(lastArg, args[p.args.eid], args[p.args.page], true, args[p.args.globalSiteId])
if cfg.entityID == "" or not mw.wikibase.entityExists(cfg.entityID) then
return "" -- we cannot continue without an entity
end
-- serve according to the given command
if funcName == p.generalCommands.label then
value = cfg:getLabel(cfg.entityID, cfg.curState.rawValue, cfg.curState.linked, cfg.curState.shortName)
elseif funcName == p.generalCommands.title then
cfg.inSitelinks = true
if cfg.entityID:sub(1,1) == "Q" then
value = mw.wikibase.getSitelink(cfg.entityID)
end
if cfg.curState.linked and value then
value = buildWikilink(value)
end
elseif funcName == p.generalCommands.description then
value = mw.wikibase.getDescription(cfg.entityID)
else
local parsedFormat, formatParams
local hooks = {count = 0}
cfg.entity = mw.wikibase.getEntity(cfg.entityID)
if funcName == p.generalCommands.alias or funcName == p.generalCommands.badge then
cfg.curState.singleValue = true
end
if funcName == p.generalCommands.alias or funcName == p.generalCommands.aliases then
if not cfg.entity.aliases or not cfg.entity.aliases[cfg.langCode] then
return "" -- there is no use to continue without any aliasses
end
local aliases = cfg.entity.aliases[cfg.langCode]
-- parse the desired format, or parse the default aliases format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
else
parsedFormat, formatParams = parseFormat(formats.alias)
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
cfg:processSeparators(args)
-- define the hook that should be called (getAlias);
-- only define the hook if the parameter ("%a") has been given
if formatParams[parameters.alias] then
hooks[parameters.alias] = getHookName(parameters.alias, 1)
hooks.count = hooks.count + 1
end
-- set the parsed format and the separators (and optional punctuation mark)
cfg:setFormatAndSeparators(cfg.curState, parsedFormat)
-- iterate to collect values
value = cfg:concatValues(cfg.curState:iterate(aliases, hooks))
elseif funcName == p.generalCommands.badge or funcName == p.generalCommands.badges then
if not cfg.entity.sitelinks or not cfg.entity.sitelinks[cfg.siteID] or not cfg.entity.sitelinks[cfg.siteID].badges then
return "" -- there is no use to continue without any badges
end
local badges = cfg.entity.sitelinks[cfg.siteID].badges
cfg.inSitelinks = true
-- parse the desired format, or parse the default aliases format
if args["format"] then
parsedFormat, formatParams = parseFormat(args["format"])
else
parsedFormat, formatParams = parseFormat(formats.badge)
end
-- process overridden separator values;
-- must come AFTER tweaking the default separators
cfg:processSeparators(args)
-- define the hook that should be called (getBadge);
-- only define the hook if the parameter ("%b") has been given
if formatParams[parameters.badge] then
hooks[parameters.badge] = getHookName(parameters.badge, 1)
hooks.count = hooks.count + 1
end
-- set the parsed format and the separators (and optional punctuation mark)
cfg:setFormatAndSeparators(cfg.curState, parsedFormat)
-- iterate to collect values
value = cfg:concatValues(cfg.curState:iterate(badges, hooks))
end
end
value = value or ""
if cfg.editable and value ~= "" then
-- if desired, add a clickable icon that may be used to edit the returned value on Wikidata
value = value .. cfg:getEditIcon()
end
return value
end
-- modules that include this module should call the functions with an underscore prepended, e.g.: p._property(args)
local function establishCommands(commandList, commandFunc)
for _, commandName in pairs(commandList) do
local function wikitextWrapper(frame)
local args = copyTable(frame.args)
args.pointer = 1
loadI18n(aliasesP, frame)
return commandFunc(args, commandName)
end
p[commandName] = wikitextWrapper
local function luaWrapper(args)
args = copyTable(args)
args.pointer = 1
loadI18n(aliasesP)
return commandFunc(args, commandName)
end
p["_" .. commandName] = luaWrapper
end
end
establishCommands(p.claimCommands, claimCommand)
establishCommands(p.generalCommands, generalCommand)
-- main function that is supposed to be used by wrapper templates
function p.main(frame)
if not mw.wikibase then return nil end
local f, args
loadI18n(aliasesP, frame)
-- get the parent frame to take the arguments that were passed to the wrapper template
frame = frame:getParent() or frame
if not frame.args[1] then
throwError("no-function-specified")
end
f = mw.text.trim(frame.args[1])
if f == "main" then
throwError("main-called-twice")
end
assert(p["_"..f], errorText('no-such-function', f))
-- copy arguments from immutable to mutable table
args = copyTable(frame.args)
-- remove the function name from the list
table.remove(args, 1)
return p["_"..f](args)
end
return p